Even our buy it now price is below the new purchase price for this camera and gimbal. We give free shipping to USA. We used this for 8 total hours of flight on an Inspire One. It is scratch free (everything), and is in like new condition. Notice we have 100% buyer ebay satisfaction! Bid with confidence! Everything is included (i.e. filter and lens protector, extra gimbal rubber guards.) It comes with the DJI factory storage case designed to fit into the DJI Inspire One storage case. This is a 4K camera that shoots amazing footage! It is designed to pop on and off of the DJI Inspire One. We decided we did not need this extra Inspire One in our fleet, so we are “parting” it out for those who have damaged their camera/gimbal. (See our other auctions for the Inspire One and case, 3 slightly used batteries, battery charger and range extended Inspire One modified radio. DJI does not supply parts and so we are thinking it worthwhile to sell the Inspire off to folks who have crashed their birds and don’t need to rebuy the whole 3K kit all over again.) Factory Specs:The Inspire 1 Gimbal and Camera Unit from DJI features the same 4K camera and 3-axis gimbal that is included with ready-to-fly versions of the Inspire 1 quadcopter. It can be used with Inspire 1 – mounting toolessly – or works with the Inspire 1 Camera Mount. The Camera Mount is a separately available handgrip that converts the Gimbal and Camera Unit into a stabilized handheld camera system for use closer to the ground. The gimbal and camera both power from the aircraft flight battery or from a battery that goes with the Camera Mount.Inspire 1 4K Camera The Inspire 1 Camera shoots 4K video at 24p and 30p, and can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis3-Axis Brushless Motor Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter CameraModelName: X3Designation: FC350SensorSony EXMOR 1/2.3″ CMOSResolution12.0 MPLensField of View: 94°Focal Length (35 mm Equivalent): 20 mm Aperture: f/2.8Design: 9 elements in 9 groups; aspherical lens elementFilters: Anti-distortion filter; UV filterVideo RecordingUHD (4K):4096 x 2160: 24p, 25p3840 x 2160: 24p, 25p, 30pFHD (1080p):1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60pHD (720p):1280 x 720: 24p, 25p, 30p, 48p, 50p, 60pMaximum Bitrate: 60 Mbp/sFile FormatPhoto: JPEG, DNGVideo: MP4 in a .MOV wrapper （MPEG-4 AVC/H.264）Recording MediaType: microSD/SDHC/SDXC up to 64 GBSpeed: Class 10 or fasterFormat: FAT32/exFATPhotography ModesSingle shotBurst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)Time-lapseOperating Temperature32 to 104°F / 0 to 40°CGimbalModelZenmuse X3Number of Axes3-axisControl Accuracy±0.03°Maximum Controlled Rotation SpeedPitch: 120°/sPan: 180°/sControlled Rotation RangePitch: -90° to +30°Pan: ±330°Angular Vibration Range±0.03°Output PowerStatic: 9 WIn Motion: 11 WOperational CurrentStatic: 750 mAIn Motion: 900 mAMountingDetachablePackaging InfoPackage Weight0.85 lbBox Dimensions (LxWxH)4.8 x 4.4 x 3.4″