DJI 1345s Quick-Release Props for T600 Inspire 1 Quadcopter (CP.EP.000052)

Print Friendly, PDF & Email

I1-PART52, DJI, DJI 1345s Quick-Release Props for T600 Inspire 1 Quadcopter (CP.EP.000052), Quick-Release Props The DJI 1345s Quick Release Props for Inspire 1 is a two pack that features on clockwise (CW) and one counter clockwise (CCW) prop. The props include the Quick Release Rotor Adapter. This part screws onto the motor and remains attached to the aircraft. The props can then be snapped on or off as needed without being unscrewed. Please refer to the user guide to ensure that you replace the CW prop with a new CW prop and a CCW prop with a CCW prop. Improper installation will lead to the props becoming unscrewed in flight. These are specifically for the DJI T600 Inspire 1 quadcopter and should not be installed on other aircraft. Note: These rotors require the Quick Release Rotor Adapters (sold separately), which must be installed before installing the props. Additionally, the self-tightening props cannot be used with the Quick Release Rotor Adapters in place. Each Pack Contains • Two Propellers • One CW Self-Tightening Propeller • One CCW Self-Tightening Propeller • Compatible with DJI T600 Inspire 1 Quadcopter • Requires Quick Release Rotor Adapter (sold separately)

Product Features

  • DJI 1345s Quick-Release Props for T600 Inspire 1 Quadcopter (CP.EP.000052)
  • The DJI 1345s Quick Release Props for Inspire 1 is a two pack that features on clockwise (CW) and one counter clockwise (CCW) prop. The props include the Quick Release Rotor Adapter. This part screws onto the motor and remains attached to the aircraft. The props can then be snapped on or off as needed without being unscrewed. Please refer to the user guide to ensure that you replace the CW prop with a new CW prop and a CCW prop with a CCW prop.
  • Improper installation will lead to the props becoming unscrewed in flight. These are specifically for the DJI T600 Inspire 1 quadcopter and should not be installed on other aircraft.
  • Note: These rotors require the Quick Release Rotor Adapters (sold separately), which must be installed before installing the props. Additionally, the self-tightening props cannot be used with the Quick Release Rotor Adapters in place.
  • Each Pack Contains • Two Propellers • One CW Self-Tightening Propeller • One CCW Self-Tightening Propeller • Compatible with DJI T600 Inspire 1 Quadcopter • Requires Quick Release Rotor Adapter (sold separately).

Click Here For More Information