DJI Inspire 1 upgraded with X5R raw camera and all added mount and drone upgrades for use with X5R camera. Comes with very sharp and fast 15mm DJI lens. With Battery, Controller,Charger, Blades, and cables. X5R camera with box and case. Bird has very low hours. Total of 20 to 25 flights. This was a back up Bird. All in great working condition. Never even a hard landing! Only flown by 35 year veteran RC helicopter pilot. No SSD included. If you don’t know the high quality of the X5R CAMERA please check DJI website. see my other auction for 512G SSD card and Reader. Bid early and often! On Mar-15-17 at 18:04:27 PDT, seller added the following information: Please note that shipping will be actual UPS cost to your location. I am not fond of ebay low balling the shipping price.
DJI Inspire 1 Pro RTF 4K video/16MB photo aerial system: 1. Dual radio controllers2. X5 MFT camera/gimbal w/ DJI 15mm f/1.7 lens3. 5 TB47 batteries, charging hub, 2 100W DJI chargers4. Tradecraft landing mode case5. extra props, prop hubs, USB cords, 64GB U3 Class10 microSD Purchase price of all parts above: $5600+ Flown responsibly by Section 333/Part 107 operator. <20 flight hours.FW updated for craft, RCs and batteries: v.220.127.116.11 @2016/12/15 Will ship to US/Canada Only. Edit: Reduced opening price < $200, subtracted 1 TB47 battery and 1 charger.
DJI Inspire 1 Pro Zenmuse X5 Camera with 15mm lens (IN STOCK!!!) Buy with confidence from an experienced. Authorized DJI Dealer! Ready to fly out of the box! We have X5 or X5R without lens version, message us for more detail!! *You need a Zenmuse X5 Vibration Absorbing Board to install X5 on your Inspire1: http://www.ebay.com/itm/DJI-Inspire-1-Pro-Vibration-Absorbing-Board-for-Zenmuse-X5-4K-Cam-IN-STOCK-/181883910832?ssPageName=STRK:MESE:IT *You need a Osmo X5 Adapter to install X5 on your Osmo: http://www.ebay.com/itm/-/172170877465?ssPageName=STRK:MESE:IT Powered by SoldEazy
Equip your DJI Inspire 1 with Micro Four Thirds imaging performance and the benefits of an interchangeable lens system with the Zenmuse X5 Camera and 3-Axis Gimbal with 15mm f/1.7 Lens. Zenmuse X5 Vibration Absorbing Board Included. This 4K camera system features an integrated 3-axis brushless gimbal that provides stabilization and enables the camera to move independently of the aircraft. In addition to video, the camera can take 16-megapixel still photos with the option for burst and time-lapse modes.
- Zenmuse X5 Vibration Absorbing Board Included
- DJI Zenmuse X5 Camera and 3-Axis Gimbal with 15mm Lens
- DCI 4K (4096 x 2160) Video Capture
- 4K video at up to 30fps
- 16MP photographs 12.8 stops of dynamic range
-Brand new from a Zenmuse X5 & never used!-Perfect manufactures working condition-Retail price $599.00-Selling because we own 3 Inspire and one is enough-Comes with lens hood, front and back caps and box !DJI MFT 15mm,F/1.7 ASPH Prime Lens for the Micro Four Thirds Zenmuse X5 Series camera and gimbal systems allows you to capture incredible aerial images and video. This lens is comprised of 9 elements in 7 groups uses 3 aspherical lenses, for maximum sharpness, while maintaining a compact size. The large F1.7 aperture gives great low-light performance and allows control over the camera’s Depth of Field for object separation and bokeh effects. When used together with the Zenmuse X5 Series, you can adjust both focus and aperture remotely via the DJI GO app, or by using the DJI Focus wireless lens control system.Note: Does come in a box. Please notify me if you want shipping insurance which will be added to final cost.
This Zenmuse X5 has been a great camera for the Inspire and OMSO. We recently upgraded our rig and no longer need this X5. It was purchased from DJI in November 2015 as part of a Inspire 1 Pro kit. Comes with the Zenmuse X5 camera/gimbal, box, SD card, 15mm DJI lens, dust cover, and usb cable. It shows MINOR wear from where we would install it on the Inspire. Let me know if you have any questions. I will not ship this internationally.
DJI AUTHORIZED DEALER HOUSTON100% AUTHENTIC DJI PRODUCT GUARANTEED PRODUCT HIGHLIGHTSMicro Four Thirds Sensor with MFT MountDCI 4K (4096 x 2160) Video Capture16MP Still PhotosOver 12 Stops of Dynamic RangeBurst and Interval Photos ModesRecords to microSD CardsWorks with Inspire 1 Quadcopter OVERVIEWEquip your DJI Inspire 1 with Micro Four Thirds imaging performance and the benefits of an interchangeable lens system with the Zenmuse X5 Camera and 3-Axis Gimbal with 15mm f/1.7 Lens. This 4K camera system features an integrated 3-axis brushless gimbal that provides stabilization and enables the camera to move independently of the aircraft. In addition to video, the camera can take 16-megapixel still photos with the option for burst and time-lapse modes.12.8 stops dynamic range for enhanced highlight and shadow detailRecords video and stills to micro-SDHC/SDXC cardsSingle shot or take bursts for 3, 5, or 7 framesTime-lapse mode captures photos at stepped intervals between 3 and 60 seconds CameraModelName: Zenmuse X5Lens MountMFT (Micro Four Thirds)Photo Resolution16 MP (4608 x 3456)Video ResolutionDCI 4K (4096 x 2160): 24p, 25p UHD 4K (3840 x 2160): 25p, 30p FHD (1920 x 1080): 24p, 25p, 30p, 48p, 50p, 60pField of view (FOV)15mm f1.7 ：72° (included)12mm f2.0：84° (available separately)Photo ModesSingle shotBurst: 3, 5, or 7 framesAuto Exposure (AE) Bracketing: 3/5 bracketed frames at 0.7 EV biasTime-Lapse: 3, 5, 7, 10, 20, 30, or 60 second intervalsISO Range100 to 25600Shutter Speed8 to 1/8000 secondVideo BitrateUp to 60 MbpsSupported File TypesPhoto: JPEG, DNG RAWVideo: MP4, MOV (MPEG-4/AVC/H.264F)File System: FAT32 / exFATRecording MediaClass 10 / UHS-1 or better microSD (up to 64 GB)Power ConsumptionStatic: 8 W Peak: 13 WGimbalModelZenmuse X5MountDetachableNumber of Axes3-axisControl Angle Accuracy±0.02°Control RangePitch: -90° to +30°Pan: ±320°Manual Control SpeedPitch: Up to 120°/secondPan: Up to 180°/secondLensCompatibilityDJI MFT 15mm f/1.7 ASPH (included)Panasonic Lumix 15mm f/1.7 (available separately)Olympus M. ED 12mm f/2.0 (available separately)ModelDJI MFT 15mm f/1.7 ASPHMountMFT (Micro Four Thirds)Focal Length15 mm 35mm Equivalent: 30 mmAperture Rangef/1.7 to f/16Focus Range0.7′ (0.2 m) to ∞Field of View72°Elements9 elements in 7 groups (3 aspherical elements)Aperture7 diaphragm blades / circular aperture diaphragmDimensionsMaximum Diameter: 2.3″ / 57.5 mm Length: 1.4″ / 36 mmWeight4.1 oz / 115 gGeneralOperating Temperature32 to 104°F / 0 to 40°CDimensions (H x W x D)4.7 x 5.3 x 5.5″ / 120 x 135 x 140 mmWeightWith Standard Lens, Balancing Ring, Lens Hood, and microSD card: 1.2 lb / 526 g
The unit has been used for about 4 months, and is in perfect condition. This auction includes: DJI X5 gimbal / micro 4/3 camera DJI 15mm f/1.7 lens (30mm equivalent) Hard case Lens and camera caps 16gb micro SD card OEM product box This kit has been used for professional work only, and not used as a “toy” Please keep in mind, to use this kit on an Inspire 1, the DJI X5 mounting board needs to be installed. For any questions or anything, please contact me. Only ship within the US, tracking and insurance is included as well. For some photo samples, visit: andrepensophoto.com
Equip your DJI Inspire 1 with Micro Four Thirds imaging performance and the benefits of an interchangeable lens system with the Zenmuse X5 Camera and 3-Axis Gimbal with 15mm f/1.7 Lens. This 4K camera system features an integrated 3-axis brushless gimbal that provides stabilization and enables the camera to move independently of the aircraft. In addition to video, the camera can take 16-megapixel still photos with the option for burst and time-lapse modes.
- Micro Four Thirds Sensor with MFT Mount
- DCI 4K (4096 x 2160) Video Capture
- Works with Inspire 1 Quadcopter
- When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1 V1.0’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board.
- Zenmuse X5 cameras require the “Landing Gear Risers” for use with Inspire 1 V2.0 that is sold separately. This “Landing Gear Risers” will be available soon.
When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera. The Inspire 1 Pro Vibration Absorbing Board is made from shock-resistant magnalium which effectively absorbs vibrations. Please refer to the DJI Tutorial video for how to mount the new vibration absorbing board.
- 4K video at up to 30fps
- Record at 4096×2160 (24fps) or 3840×2160 (30/25fps)
- 16MP photographs
- 12.8 stops of dynamic range
- Mount Zenmuse X5/X5R Camera on Inspire 1 / PRO / RAW