DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal! 3 Battery Kit!!

Extended Warranty Protection Plans SHOP CATEGORIES Shipping Warranty Returns & Policies About Us Contact Us Add to Favourites DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal! 3 Battery Kit!! Product Includes: Microfiber Cleaning ClothLanyard StrapHigh Speed SD/SDHC/Micro SD Reader/WriterSanDisk Extreme 32GB microSDHC UHS-1 Card Up to 90MB/s Read with Adapter (SDSQXNE-032G-GN6MA)ULTIMAXX 7 Piece Filter Kit for Inspire 1/Osmo Series (UV + CPL + Variable ND2 to ND400 + Lens Hood + Case + Cloth)ULTIMAXX DJI INSPIRE 1 TRIPLE BATTERY PLATE/BOARDULTIMAXX DJI INSPIRE 1 CARBON FIBER PROPELLERS (4)ULTIMAXX DJI MEDIUM SUNSHADE DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal – Single RemoteDJI TB47 Inspire 1 – Spare Battery x2Xtreme VR Vue II Virtual Reality Viewer LONG DESCRIPTION Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera. As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an “indoor” mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode). This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more. What’s New for v2? Zenmuse X5/X5R Compatibility In addition to the included Zenmuse X3, this version of the Inspire 1 also works with the Zenmuse X5 and X5R gimbal cameras (available separately) New Propulsion System With the new 3510H motor, the thrust sees a boost. This yields an increase in the motor velocity constant from 350 Kv to 420 Kv. In practice, this translates into better control, especially when using a Zenmuse X5 series gimbal camera Redesigned Propellers To go with the 3510H motors, new propellers and a new propeller mounting system have been introduced. They employ an updated mounting system, designed to make attaching and removing the propellers easier than ever before What Ready-to-Fly Means This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flight Integrated 4K Camera 4K and HD Video Capture The Inspire 1 Camera shoots 4K video at 24p and 30p, and it can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis 3-Axis Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter Live HD View A real-time feed from the Inspire 1 Camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device’s battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter Modular Gimbal and Camera Inspire 1’s gimbal and camera can be removed from the aircraft for safe transport and future upgrades Airframe Design Retractable Carbon Fiber Arms The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio Aerodynamic Design Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life Flight Control System Fly Indoors and Without GPS DJI’s Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable App-Based Control Software Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required Manual Mode Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want Live Map and Radar See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path Dynamic Home Point When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function Auto-Takeoff and Landing Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land Transmitter Customization Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable with Transmitter (Radio Controller) Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery Use Two Transmitters For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time Smart Battery System Smart Power Management The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home Automated Charging The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status DETAILED LIST OF ITEMS INCLUDED Product Includes Cleaning Cloth Microfiber Cleaning Cloth SHORT DESCRIPTION Lens Cleaning Cloth made of soft micro-fibers is perfect for maintaining, and cleaning your camera, and binocular optics. Product Includes White Lanyard Strap Lanyard Strap SHORT DESCRIPTION High quality lanyard Product Includes SD/SDHC/Micro SD memory card reader/writer High Speed SD/SDHC/Micro SD Reader/Writer SHORT DESCRIPTION Product Specifications • Easy plug & play installation • Reads & writes information from & to SD cards • Conserve camera battery life • Rapid data transfer • High Speed USB • Perfect for people on the go • Limited life time warranty MAC & PC system compatibility • Microsoft XP and Window 7 & 8 • MAC 10.4.6 or greater Product Includes SanDisk 32GB Extreme UHS-I microSDHC Memory Card (U3/Class 10) SD Adapter Limited Lifetime Warranty SanDisk Extreme 32GB microSDHC UHS-1 Card Up to 90MB/s Read with Adapter (SDSQXNE-032G-GN6MA) SHORT DESCRIPTION 32GB Storage Capacity Class 10 / UHS-I Speed Class 3 (U3) Compatible Max. Read Speed: 90 MB/s Max. Write Speed: 40 MB/s Water / Shock / X-ray Proof Built-in Write-Protect Switch Downloadable RescuePRO Recovery Software Product Includes Multi-Coated Ultraviolet (UV) Filter Multi-Coated Circular Polarizer (CPL) Filter Multi-Coated Variable ND2-ND400 Filter Rose Petal Lens Hood Lens Cap/Gimbal Stabilizer Protective Case with 4 Inner Pockets High Quality Microfiber Cleaning Cloth ULTIMAXX 7 Piece Filter Kit for Inspire 1/Osmo Series (UV + CPL + Variable ND2 to ND400 + Lens Hood + Case + Cloth) SHORT DESCRIPTION 7 Piece HD Digital Filter Kit Multi-Coated Ultraviolet (UV) Filter Multi-Coated Circular Polarizer (CPL) Filter Multi-Coated Variable ND2-ND400 Filter Rose Petal Lens Hood Lens Cap/Gimbal Stabilizer Protective Case with 4 Inner Pockets High Quality Microfiber Cleaning Cloth Digital Multi Coated High Quality HD Optics For DJI INSPIRE 1 / OSMO Limited Lifetime Warranty Product Includes Parallel Triple Charger For DJI Inspire 1 ULTIMAXX DJI INSPIRE 1 TRIPLE BATTERY PLATE/BOARD SHORT DESCRIPTION Parallel multi-battery charger adapter plate for DJI Inspire 1 Quadcopter battery Can charge three batteries at one time Works with original DJI battery charger Designed for DJI Inspire 1 Product Includes 2 clockwise and 2 counter-clockwise propellers ULTIMAXX DJI INSPIRE 1 CARBON FIBER PROPELLERS (4) SHORT DESCRIPTION 1345 Self-tightening carbon fiber propellers (with a composite hub) These high quality carbon fiber propellers work much better than the stock propeller, the stock props or non-carbon fiber props are soft and less efficient, carbon fiber props are lighter and much stronger therefore increasing flying efficiency Fits DJI Inspire 1 quadcopter Self-tightening design keeps the propellers securely to each motor No tools required. Self-tightening design, simply rotate the propellers by hand to attach or detach Includes two pairs of propellers: 2 clockwise and 2 counter-clockwise propellers Designed for DJI Inspire 1 Product Includes MEDIUM SUNSHADE ULTIMAXX DJI MEDIUM SUNSHADE SHORT DESCRIPTION Compatible with all DJI Phantom 3 & Inspire 1 quadcopter remote controllers. Lightweight, foldable, easy to carry Monitor iPad / tablet can be easily held firmly or removed with the suction cups on the hood Velcro design, easy to install and disassemble. There is a slot on top of the shade that the stock iPad clip slides through and then the bottom of clip holds iPad and shade together Small model is 5.5 inch and fits all Iphones, Galaxy, HTC and similar size smart phones Medium model fits 7.9 inch tablets such as Ipad mini and similar size 8 inch tablets Large model fits 9.7 inch tablets such as iPad Air 2, iPad Air and similar sized 10 inch tablets Product Includes DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal Transmitter for Inspire 1 Quadcopter (White) Zenmuse X3 Gimbal and Camera Unit (Inspire 1 Variant) Mobile Device Holder TB47 Intelligent Flight Battery for Inspire 1 (99.9Wh, White) ND Filter Flight Battery Charger Charging Cable for Transmitter Power Cord 4 x Spare Prop CW/CCW Pairs 16GB microSD Memory Suitcase for Inspire 1 Quadcopter DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal – Single Remote SHORT DESCRIPTION Capture 4K Video and 12MP Stills 3-Axis Gimbal Stabilizes Camera Up to 1.2 Mile Radio Range GPS-Based Flight Control System Vision Positioning for Indoor Flying Live 720p HD Monitoring with Lightbridge Thrust-Boosted Motors / New Propellers Retractable Carbon Fiber Arms Unobstructed 360° Shooting Dual Transmitter Operation Supported Product Includes DJI TB47 Inspire 1 – Spare Battery DJI TB47 Inspire 1 – Spare Battery (x2) SHORT DESCRIPTION Capacity of 4500mAh Intelligent Power Management LED Status Indicators Product Includes VR VUE II: Virtual Reality View Xtreme VR Vue II Virtual Reality Viewer SHORT DESCRIPTION Transform your smartphone into an immersive VR viewer Watch movies, 360º videos, or play games in 3D 4 Position eye piece adjustment- fit different face sizes Slide out tray holds phone securely Eye piece opens for augmented reality feature Over 1,500 VR apps to download from Playstore or App store Supports iPhones and Androids (screen sizes: 3.5″-6″) Utilizes motion sensor of phone to create 360º views Features audio ports & adjustable head strap SHIPPING TERMS OF SALE ABOUT US CONTACT US Warranty Domestic Shipping We do not ship orders over $750 to PO boxes We offer 3 levels of expedited shipping at checkout. Insurance and upgraded shipping is available on all packages, call for our best quote. We can only ship to the address listed on the order when purchased. Please make sure you choose the correct address when you make the payment. If you have any questions please call us before paying and we will be happy to help. INTERNATIONAL SHIPPING International orders will be shipped with DHL Tracking Information will be provided. Customs & Duties International buyers are responsible for any and all customs, duties taxes and brokerage fees to be paid to the courier or government. Please contact your local customs office with further inquiries in this issue. The Pixel Hub assumes no responsibility with respect to any tariffs, duties, or any and all other charges requested or required by destination countries. When clicking the Buy-It-Now button or placing a bid you automatically enter into a legally binding contract to purchase the item. Please commit to buy only after you decided to purchase & you are ready to pay. We are required to collect state tax from NY state buyers. Price protection Policy: Because prices fluctuate, we do not offer price Protection. Once an order is shipped, all sale prices are final. Return Policy Because of fraud WE DO NOT RE-ROUTE packages, PICKING A PRODUCT AT A UPS HUB IS NOT AN OPTION. No Exceptions. Returns can take 3 to 5 business days to process. If you will not be at home to sign for a package, during check out you have the option to send it to your work or a friend or family member. For the first 14 days from the date of your purchase, you can return new unused merchandise for a refund or an exchange minus a 10% restocking fee and shipping cost. You must include the original packaging and the item must be in NEW condition. Items and packing must not be marred, mishandled, or tampered with by an unauthorized repair person. All returns must include the item’s original undamaged packaging and instructions. Returns must also include the blank warranty card where applicable. Returns must include all the manufactures supplied accessories. All products must be returned in its original manufactures box. Returns must be free of any physical or cosmetic damage. When upon inspection if these conditions are not met the product will be either sent for repair in the customer’s name or immediately sent back to the customer at customer’s expense. Defective Items can be returned for an exchange or refund within 14 days of purchase only if the item is in new condition and free of any cosmetic damage. If the product has cosmetic or physical damage, it will be sent to the manufacture for repair in the customer’s name. We are not responsible for personal data or items left in returned merchandise. Camcorders with timers must show less than 30 minutes of use. Items with shutter counters must show less than 30 exposures. All Receivers must be accompanied with the original box in order to be considered for a return, exchange or repair. No Exceptions We do not accept returns on the following items: GoPro Cameras, Drones, Quad-copters, Apple products, NOOK and Kindle Tablets. Videos tapes, Underwater equipment or products that were submerged in water. When making your return, please include a copy of the invoice and a short note stating the reason for your return. In your note, please specify whether you wish to exchange the product or receive a refund. Refused shipments: A 10% restocking fee and shipping charges will be imposed on all refused shipments or return shipments due to incorrect address. Cancellations: once we receive an order from amazon it can no longer be canceled. The customer can either return or refuse the package. In order to track down an order for the purposes of canceling it, would completely disrupt our business, our shipping department, and interfere with our productivity. Typographical Policy: We are not responsible for typographical or pricing errors. If there was a problem with this listing and it was discovered after you already received the product you are welcome to return it for a full refund as long as it is unused. Pictures of accessories are for illustration purposes only. Price protection Policy: Because prices fluctuate, we do not offer price Protection. Once an order is shipped, all sale prices are final. We do not sell to resellers: we work hard at getting the best deals for the consumer not the reseller. Those order will be cancelled without any notice. RISK OF LOSS: All items purchased from eBay are made pursuant to a shipment contract. This means that the risk of loss and title for such items pass to you upon our delivery to the carrier. We are not responsible for any consequential or incidental damage resulting from the sale or use of any merchandise bought from us. We are responsible for the monetary value of the merchandise only. Please Note For Appliance Purchases: All Appliances are 100% Brand New and professionally delivered to your door. All sales are Final; we do not offer refund or exchanges on appliance purchases. Please make sure you have measured and can confirm that your appliance will fit in desired location. It is important to know if your house or apartment is wired with gas or electric connections. Please check before purchasing and select the correct one. When it comes to defective merchandise, once the package is signed for and the recipient has confirmed the product is in perfect condition, Sunset Electronics is no longer responsible for the defective products. The recipient is responsible to file all damage claims with the delivery company once the package has been signed for. The Pixel Hub is a full-service camera online store and photographic equipment retailer that has been in business for over 15 years. Our staff is made up of accomplished photographers and experienced professionals who are extremely knowledgeable about the products we offer and the ever-advancing photography industry. We are constantly striving to evaluate, obtain and offer you the newest and most exciting products available, with an unparalleled commitment to customer service. The Pixel Hub carries almost all the major brands of photographic equipment. We offer a wide range of Digital and Film Cameras, Lenses, Flashes and Accessories. We also stock many other types of digital and photo imaging equipment, including high-quality photo printers, film scanners and more. In 1999, we expanded our business to the Internet as The Pixel Hub on eBay. We quickly became the largest eBay Seller specializing exclusively in the sale of photographic equipment and accessories. The Pixel Hub has grown considerably since then, but we have maintained our focus on the very core of our success…our customers. As our feedback rating shows, we do everything we can to make every customer’s experience a positive one! You can either contact us through eBay’s messaging system or you can give us a call at 347-289-7296 Extended Warranty Protection Plans To find out what warranty coverage the item currently has please check the Item Includes section in the listing. If you are not able to locate it please feel free to contact us and we will gladly assist you. For Extended warranty options we work with Authorized Repair Centers. You have up to 30 days after your purchase to add an extended warranty that will cover Damages, Drops, Spills and more. Shop with Confidence Quick Links – Payment Details – Shipping Details – Returns – About Us – Contact Us – Store Home – Add to Favourites – New Arrivals – Ending Soon – Feedback Payment Options Secure Payments by Store Newsletter Add Store to your Favourites and receive email newsletters about new items and special promotions! © ThePixelHub. eBay Store Designed & Developed by THE PIXEL HUB Buy it Now Protect It Now with a Consumer Priority Service Warranty

DJI Inspire 1 v2.0 Quadcopter w/ 4K Camera & 3-Axis Gimbal For Parts Not Working

DJI Inspire 1 v2.0 Quadcopter w/ 4K Camera & 3-Axis Gimbal AS IS For Parts Not Working Comes in original case and shipping box. We do not know what is wrong with it. It won’t power on and we tried 2 different batteries in it. We do not know anything about it, except that it doesn’t work. No, we won’t do a buy it now, so please don’t ask. Parts valued at over $800.00 As Is, No Returns. Payment via Paypal only. We only ship to Paypal verified addresses.

DJI Inspire 1 PRO Quadcopter with Zenmuse X5 4K Camera and 3-Axis Gimbal

Includes 5 BATTERIES 4K MFT Camera with 3-Axis Gimbal15mm f/1.7 Lens IncludedUp to 1.2 Mile Radio RangeGPS-Based Stabilization SystemOptical Flow Sensor for Indoor FlyingDJI Lightbridge System IntegratedLive 720p HD Monitoring with LightbridgeRetractable Carbon Fiber ArmsUnobstructed 360° ShootingDual Transmitter Operation SupportedOn Feb-02-17 at 10:02:57 PST, seller added the following information: SHIPPING WILL VARY, IF YOU WANT THE CASE THAT COMES WITH IT SHIPPING WILL OBVIOUSLY BE MORE EXPENSIVE AND ADJUSTED TO WHOMEVER WINS THE BID!

DJI Zenmuse X4S 20MP Camera and 3-Axis Gimbal with 8.8mm f/2.8-11 Lens

The Zenmuse X4S is a powerful camera featuring a 20 megapixel 1″ sensor and a maximum ISO of 12,800. Dynamic range is increased from the Zenmuse X3 by 1 stop, with signal to noise ratio and color sensitivity increased by 1.5 stops for next-level image quality. The Zenmuse X4S uses a DJI-designed compact lens with low dispersion and low distortion 24mm equivalent prime lens. This 84deg. FOV, high resolution lens makes the Zenmuse X4S as powerful during aerial imaging as it is on the ground.Combined with CineCore 2.0, the Inspire 2’s powerful image processing system, it can record 4K/60 H.264 and 4K/30 H.265 videos at a 100Mbps bitrate and oversample 5.2K video into 4K video in real-time, capturing fine image details. In Burst Mode, the Zenmuse X4S supports 14fps shooting at 20 megapixels in both JPEG and DNG formats. It is able to make the difficult balance between agility and image quality. The Inspire 2 Flying Camera Compared with the Inspire 1, the Inspire 2 utilizes an innovative structure that separates the CineCore 2.0 image processing system from the camera and places it inside the aircraft. This means that the sensor and optical system are detachable and easily connected using a newly designed quick-release connector. Designing the camera system in this way effectively protects the sensor from magnetic interference originating from the processor. It also allows a range of lightweight camera units to be connected as required by different scene

Product Features

  • DJI Camera – Gimbal – Lens – DJI Warranty
  • 20 megapixel 1-inch sensor
  • Maximum ISO of 12,800
  • DJI-designed compact lens with low dispersion and low distortion 24mm equivalent prime lens. This 84 FOV, high resolution lens makes the Zenmuse X4S as powerful during aerial imaging as it is on the ground
  • Combined with CineCore 2.0, the Inspire 2’s powerful image processing system, it can record 4K/60 H.264 and 4K/30 H.265 videos at a 100Mbps bitrate, and oversample 5.2K video into 4K video in real-time, capturing fine image details.

Click Here For More Information

DJI Inspire 1 Quadcopter with 4K Camera and 3-Axis Gimbal

Dual Transmitter Operation Supported Unobstructed 360° Shooting Retractable Carbon Fiber Arms Live 720p HD Monitoring with Lightbridge Vision Positioning for Indoor Flying GPS-Based Flight Control System Up to 1.2 Mile Radio Range 3-Axis Gimbal Stabilizes Camera Capture 4K Video and 12MP Stills

Product Features

  • Capture 4K Video and 12MP Stills
  • 3-Axis Gimbal Stabilizes Camera
  • Up to 1.2 Mile Radio Range
  • GPS-Based Flight Control System
  • Vision Positioning for Indoor Flying.

Click Here For More Information

DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal! READY TO FLY KIT

Extended Warranty Protection Plans SHOP CATEGORIES Shipping Warranty Returns & Policies About Us Contact Us Add to Favourites DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal! READY TO FLY KIT Product Includes: DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal – Single RemoteMicrofiber Cleaning ClothLanyard StrapHigh Speed SD/SDHC/Micro SD Reader/WriterSanDisk Extreme 32GB microSDHC UHS-1 Card Up to 90MB/s Read with Adapter (SDSQXNE-032G-GN6MA)ULTIMAXX 7 Piece Filter Kit for Inspire 1/Osmo Series (UV + CPL + Variable ND2 to ND400 + Lens Hood + Case + Cloth)ULTIMAXX DJI INSPIRE 1 TRIPLE BATTERY PLATE/BOARDULTIMAXX DJI INSPIRE 1 CARBON FIBER PROPELLERS (4)ULTIMAXX DJI MEDIUM SUNSHADE LONG DESCRIPTION Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera. As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an “indoor” mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode). This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more. What’s New for v2? Zenmuse X5/X5R Compatibility In addition to the included Zenmuse X3, this version of the Inspire 1 also works with the Zenmuse X5 and X5R gimbal cameras (available separately) New Propulsion System With the new 3510H motor, the thrust sees a boost. This yields an increase in the motor velocity constant from 350 Kv to 420 Kv. In practice, this translates into better control, especially when using a Zenmuse X5 series gimbal camera Redesigned Propellers To go with the 3510H motors, new propellers and a new propeller mounting system have been introduced. They employ an updated mounting system, designed to make attaching and removing the propellers easier than ever before What Ready-to-Fly Means This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flight Integrated 4K Camera 4K and HD Video Capture The Inspire 1 Camera shoots 4K video at 24p and 30p, and it can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis 3-Axis Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter Live HD View A real-time feed from the Inspire 1 Camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device’s battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter Modular Gimbal and Camera Inspire 1’s gimbal and camera can be removed from the aircraft for safe transport and future upgrades Airframe Design Retractable Carbon Fiber Arms The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio Aerodynamic Design Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life Flight Control System Fly Indoors and Without GPS DJI’s Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable App-Based Control Software Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required Manual Mode Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want Live Map and Radar See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path Dynamic Home Point When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function Auto-Takeoff and Landing Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land Transmitter Customization Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable with Transmitter (Radio Controller) Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery Use Two Transmitters For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time Smart Battery System Smart Power Management The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home Automated Charging The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status DETAILED LIST OF ITEMS INCLUDED Product Includes DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal Transmitter for Inspire 1 Quadcopter (White) Zenmuse X3 Gimbal and Camera Unit (Inspire 1 Variant) Mobile Device Holder TB47 Intelligent Flight Battery for Inspire 1 (99.9Wh, White) ND Filter Flight Battery Charger Charging Cable for Transmitter Power Cord 4 x Spare Prop CW/CCW Pairs 16GB microSD Memory Suitcase for Inspire 1 Quadcopter DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal – Single Remote SHORT DESCRIPTION Capture 4K Video and 12MP Stills 3-Axis Gimbal Stabilizes Camera Up to 1.2 Mile Radio Range GPS-Based Flight Control System Vision Positioning for Indoor Flying Live 720p HD Monitoring with Lightbridge Thrust-Boosted Motors / New Propellers Retractable Carbon Fiber Arms Unobstructed 360° Shooting Dual Transmitter Operation Supported Product Includes Cleaning Cloth Microfiber Cleaning Cloth SHORT DESCRIPTION Lens Cleaning Cloth made of soft micro-fibers is perfect for maintaining, and cleaning your camera, and binocular optics. Product Includes White Lanyard Strap Lanyard Strap SHORT DESCRIPTION High quality lanyard Product Includes SD/SDHC/Micro SD memory card reader/writer High Speed SD/SDHC/Micro SD Reader/Writer SHORT DESCRIPTION Product Specifications • Easy plug & play installation • Reads & writes information from & to SD cards • Conserve camera battery life • Rapid data transfer • High Speed USB • Perfect for people on the go • Limited life time warranty MAC & PC system compatibility • Microsoft XP and Window 7 & 8 • MAC 10.4.6 or greater Product Includes SanDisk 32GB Extreme UHS-I microSDHC Memory Card (U3/Class 10) SD Adapter Limited Lifetime Warranty SanDisk Extreme 32GB microSDHC UHS-1 Card Up to 90MB/s Read with Adapter (SDSQXNE-032G-GN6MA) SHORT DESCRIPTION 32GB Storage Capacity Class 10 / UHS-I Speed Class 3 (U3) Compatible Max. Read Speed: 90 MB/s Max. Write Speed: 40 MB/s Water / Shock / X-ray Proof Built-in Write-Protect Switch Downloadable RescuePRO Recovery Software Product Includes Multi-Coated Ultraviolet (UV) Filter Multi-Coated Circular Polarizer (CPL) Filter Multi-Coated Variable ND2-ND400 Filter Rose Petal Lens Hood Lens Cap/Gimbal Stabilizer Protective Case with 4 Inner Pockets High Quality Microfiber Cleaning Cloth ULTIMAXX 7 Piece Filter Kit for Inspire 1/Osmo Series (UV + CPL + Variable ND2 to ND400 + Lens Hood + Case + Cloth) SHORT DESCRIPTION 7 Piece HD Digital Filter Kit Multi-Coated Ultraviolet (UV) Filter Multi-Coated Circular Polarizer (CPL) Filter Multi-Coated Variable ND2-ND400 Filter Rose Petal Lens Hood Lens Cap/Gimbal Stabilizer Protective Case with 4 Inner Pockets High Quality Microfiber Cleaning Cloth Digital Multi Coated High Quality HD Optics For DJI INSPIRE 1 / OSMO Limited Lifetime Warranty Product Includes Parallel Triple Charger For DJI Inspire 1 ULTIMAXX DJI INSPIRE 1 TRIPLE BATTERY PLATE/BOARD SHORT DESCRIPTION Parallel multi-battery charger adapter plate for DJI Inspire 1 Quadcopter battery Can charge three batteries at one time Works with original DJI battery charger Designed for DJI Inspire 1 Product Includes 2 clockwise and 2 counter-clockwise propellers ULTIMAXX DJI INSPIRE 1 CARBON FIBER PROPELLERS (4) SHORT DESCRIPTION 1345 Self-tightening carbon fiber propellers (with a composite hub) These high quality carbon fiber propellers work much better than the stock propeller, the stock props or non-carbon fiber props are soft and less efficient, carbon fiber props are lighter and much stronger therefore increasing flying efficiency Fits DJI Inspire 1 quadcopter Self-tightening design keeps the propellers securely to each motor No tools required. Self-tightening design, simply rotate the propellers by hand to attach or detach Includes two pairs of propellers: 2 clockwise and 2 counter-clockwise propellers Designed for DJI Inspire 1 Product Includes MEDIUM SUNSHADE ULTIMAXX DJI MEDIUM SUNSHADE SHORT DESCRIPTION Compatible with all DJI Phantom 3 & Inspire 1 quadcopter remote controllers. Lightweight, foldable, easy to carry Monitor iPad / tablet can be easily held firmly or removed with the suction cups on the hood Velcro design, easy to install and disassemble. There is a slot on top of the shade that the stock iPad clip slides through and then the bottom of clip holds iPad and shade together Small model is 5.5 inch and fits all Iphones, Galaxy, HTC and similar size smart phones Medium model fits 7.9 inch tablets such as Ipad mini and similar size 8 inch tablets Large model fits 9.7 inch tablets such as iPad Air 2, iPad Air and similar sized 10 inch tablets SHIPPING TERMS OF SALE ABOUT US CONTACT US Warranty Domestic Shipping We do not ship orders over $750 to PO boxes We offer 3 levels of expedited shipping at checkout. Insurance and upgraded shipping is available on all packages, call for our best quote. We can only ship to the address listed on the order when purchased. Please make sure you choose the correct address when you make the payment. If you have any questions please call us before paying and we will be happy to help. INTERNATIONAL SHIPPING International orders will be shipped with DHL Tracking Information will be provided. Customs & Duties International buyers are responsible for any and all customs, duties taxes and brokerage fees to be paid to the courier or government. Please contact your local customs office with further inquiries in this issue. The Pixel Hub assumes no responsibility with respect to any tariffs, duties, or any and all other charges requested or required by destination countries. When clicking the Buy-It-Now button or placing a bid you automatically enter into a legally binding contract to purchase the item. Please commit to buy only after you decided to purchase & you are ready to pay. We are required to collect state tax from NY state buyers. Price protection Policy: Because prices fluctuate, we do not offer price Protection. Once an order is shipped, all sale prices are final. Return Policy Because of fraud WE DO NOT RE-ROUTE packages, PICKING A PRODUCT AT A UPS HUB IS NOT AN OPTION. No Exceptions. Returns can take 3 to 5 business days to process. If you will not be at home to sign for a package, during check out you have the option to send it to your work or a friend or family member. For the first 14 days from the date of your purchase, you can return new unused merchandise for a refund or an exchange minus a 10% restocking fee and shipping cost. You must include the original packaging and the item must be in NEW condition. Items and packing must not be marred, mishandled, or tampered with by an unauthorized repair person. All returns must include the item’s original undamaged packaging and instructions. Returns must also include the blank warranty card where applicable. Returns must include all the manufactures supplied accessories. All products must be returned in its original manufactures box. Returns must be free of any physical or cosmetic damage. When upon inspection if these conditions are not met the product will be either sent for repair in the customer’s name or immediately sent back to the customer at customer’s expense. Defective Items can be returned for an exchange or refund within 14 days of purchase only if the item is in new condition and free of any cosmetic damage. If the product has cosmetic or physical damage, it will be sent to the manufacture for repair in the customer’s name. We are not responsible for personal data or items left in returned merchandise. Camcorders with timers must show less than 30 minutes of use. Items with shutter counters must show less than 30 exposures. All Receivers must be accompanied with the original box in order to be considered for a return, exchange or repair. No Exceptions We do not accept returns on the following items: GoPro Cameras, Drones, Quad-copters, Apple products, NOOK and Kindle Tablets. Videos tapes, Underwater equipment or products that were submerged in water. When making your return, please include a copy of the invoice and a short note stating the reason for your return. In your note, please specify whether you wish to exchange the product or receive a refund. Refused shipments: A 10% restocking fee and shipping charges will be imposed on all refused shipments or return shipments due to incorrect address. Cancellations: once we receive an order from amazon it can no longer be canceled. The customer can either return or refuse the package. In order to track down an order for the purposes of canceling it, would completely disrupt our business, our shipping department, and interfere with our productivity. Typographical Policy: We are not responsible for typographical or pricing errors. If there was a problem with this listing and it was discovered after you already received the product you are welcome to return it for a full refund as long as it is unused. Pictures of accessories are for illustration purposes only. Price protection Policy: Because prices fluctuate, we do not offer price Protection. Once an order is shipped, all sale prices are final. We do not sell to resellers: we work hard at getting the best deals for the consumer not the reseller. Those order will be cancelled without any notice. RISK OF LOSS: All items purchased from eBay are made pursuant to a shipment contract. This means that the risk of loss and title for such items pass to you upon our delivery to the carrier. We are not responsible for any consequential or incidental damage resulting from the sale or use of any merchandise bought from us. We are responsible for the monetary value of the merchandise only. Please Note For Appliance Purchases: All Appliances are 100% Brand New and professionally delivered to your door. All sales are Final; we do not offer refund or exchanges on appliance purchases. Please make sure you have measured and can confirm that your appliance will fit in desired location. It is important to know if your house or apartment is wired with gas or electric connections. Please check before purchasing and select the correct one. When it comes to defective merchandise, once the package is signed for and the recipient has confirmed the product is in perfect condition, Sunset Electronics is no longer responsible for the defective products. The recipient is responsible to file all damage claims with the delivery company once the package has been signed for. The Pixel Hub is a full-service camera online store and photographic equipment retailer that has been in business for over 15 years. Our staff is made up of accomplished photographers and experienced professionals who are extremely knowledgeable about the products we offer and the ever-advancing photography industry. We are constantly striving to evaluate, obtain and offer you the newest and most exciting products available, with an unparalleled commitment to customer service. The Pixel Hub carries almost all the major brands of photographic equipment. We offer a wide range of Digital and Film Cameras, Lenses, Flashes and Accessories. We also stock many other types of digital and photo imaging equipment, including high-quality photo printers, film scanners and more. In 1999, we expanded our business to the Internet as The Pixel Hub on eBay. We quickly became the largest eBay Seller specializing exclusively in the sale of photographic equipment and accessories. The Pixel Hub has grown considerably since then, but we have maintained our focus on the very core of our success…our customers. As our feedback rating shows, we do everything we can to make every customer’s experience a positive one! You can either contact us through eBay’s messaging system or you can give us a call at 347-289-7296 Extended Warranty Protection Plans To find out what warranty coverage the item currently has please check the Item Includes section in the listing. If you are not able to locate it please feel free to contact us and we will gladly assist you. For Extended warranty options we work with Authorized Repair Centers. You have up to 30 days after your purchase to add an extended warranty that will cover Damages, Drops, Spills and more. Shop with Confidence Quick Links – Payment Details – Shipping Details – Returns – About Us – Contact Us – Store Home – Add to Favourites – New Arrivals – Ending Soon – Feedback Payment Options Secure Payments by Store Newsletter Add Store to your Favourites and receive email newsletters about new items and special promotions! © ThePixelHub. eBay Store Designed & Developed by THE PIXEL HUB Buy it Now Protect It Now with a Consumer Priority Service Warranty

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal With 15mm lens included Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal With 15mm lens included Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI Inspire 1 v2.0 Quadcopter w/ 4K Camera and 3-Axis Gimbal! 3 BATTERY PRO KIT!

Add store to Favorites Store Home About Us Feedback New Arrivals Ending Soon Contact Us Browse All Categories FAST SHIPPING FREE SHIPPING INTERNATIONAL SHIPPING SECURE PAYMENT SATISFACTION GUARANTEE BROWSE BY CATEGORIES DJI Inspire 1 v2.0 Quadcopter w/ 4K Camera and 3-Axis Gimbal! 3 BATTERY PRO KIT! KIT INCLUDES LONG DESCRIPTION Microfiber Cleaning ClothLanyard StrapSanDisk Extreme 32GB microSDHC UHS-1 Card Up to 90MB/s Read with Adapter (SDSQXNE-032G-GN6MA)ULTIMAXX 7 Piece Filter Kit for Inspire 1/Osmo Series (UV + CPL + Variable ND2 to ND400 + Lens Hood + Case + Cloth)ULTIMAXX DJI INSPIRE 1 TRIPLE BATTERY PLATE/BOARDULTIMAXX BACKPACK STRAP ADAPTERULTIMAXX DJI INSPIRE 1 CARBON FIBER PROPELLERS (4)ULTIMAXX DJI MEDIUM SUNSHADE DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal – Single RemoteDJI TB47 Inspire 1 – Spare Battery x2ULTIMAXX High Speed SD/SDHC/Micro SD Reader/CARD READER Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 v2.0 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera. As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an “indoor” mode which relies on Vision Positioning technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode). This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more. What’s New for v2? Zenmuse X5/X5R Compatibility In addition to the included Zenmuse X3, this version of the Inspire 1 also works with the Zenmuse X5 and X5R gimbal cameras (available separately) New Propulsion System With the new 3510H motor, the thrust sees a boost. This yields an increase in the motor velocity constant from 350 Kv to 420 Kv. In practice, this translates into better control, especially when using a Zenmuse X5 series gimbal camera Redesigned Propellers To go with the 3510H motors, new propellers and a new propeller mounting system have been introduced. They employ an updated mounting system, designed to make attaching and removing the propellers easier than ever before What Ready-to-Fly Means This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flight Integrated 4K Camera 4K and HD Video Capture The Inspire 1 Camera shoots 4K video at 24p and 30p, and it can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis 3-Axis Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter Live HD View A real-time feed from the Inspire 1 Camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 miles For connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device’s battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitter Modular Gimbal and Camera Inspire 1’s gimbal and camera can be removed from the aircraft for safe transport and future upgrades Airframe Design Retractable Carbon Fiber Arms The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratio Aerodynamic Design Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery life Flight Control System Fly Indoors and Without GPS DJI’s Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailable App-Based Control Software Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station System Note: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is required Manual Mode Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you want Live Map and Radar See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight path Dynamic Home Point When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point function Auto-Takeoff and Landing Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto land Transmitter Customization Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable with Transmitter (Radio Controller) Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable battery Use Two Transmitters For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time Smart Battery System Smart Power Management The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return home Automated Charging The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal Transmitter for Inspire 1 Quadcopter (White) Zenmuse X3 Gimbal and Camera Unit (Inspire 1 Variant) Mobile Device Holder TB47 Intelligent Flight Battery for Inspire 1 (99.9Wh, White) ND Filter Flight Battery Charger Charging Cable for Transmitter Power Cord 4 x Spare Prop CW/CCW Pairs 16GB microSD Memory Suitcase for Inspire 1 Quadcopter KIT DETAILS Microfiber Cleaning Cloth Lens Cleaning Cloth made of soft micro-fibers is perfect for maintaining, and cleaning your camera, and binocular optics. Product Includes Cleaning Cloth Lanyard Strap High quality lanyard Product Includes White Lanyard Strap SanDisk Extreme 32GB microSDHC UHS-1 Card Up to 90MB/s Read with Adapter (SDSQXNE-032G-GN6MA) 32GB Storage Capacity Class 10 / UHS-I Speed Class 3 (U3) Compatible Max. Read Speed: 90 MB/s Max. Write Speed: 40 MB/s Water / Shock / X-ray Proof Built-in Write-Protect Switch Downloadable RescuePRO Recovery Software Product Includes SanDisk 32GB Extreme UHS-I microSDHC Memory Card (U3/Class 10) SD Adapter Limited Lifetime Warranty ULTIMAXX 7 Piece Filter Kit for Inspire 1/Osmo Series (UV + CPL + Variable ND2 to ND400 + Lens Hood + Case + Cloth) 7 Piece HD Digital Filter Kit Multi-Coated Ultraviolet (UV) Filter Multi-Coated Circular Polarizer (CPL) Filter Multi-Coated Variable ND2-ND400 Filter Rose Petal Lens Hood Lens Cap/Gimbal Stabilizer Protective Case with 4 Inner Pockets High Quality Microfiber Cleaning Cloth Digital Multi Coated High Quality HD Optics For DJI INSPIRE 1 / OSMO Limited Lifetime Warranty Product Includes Multi-Coated Ultraviolet (UV) Filter Multi-Coated Circular Polarizer (CPL) Filter Multi-Coated Variable ND2-ND400 Filter Rose Petal Lens Hood Lens Cap/Gimbal Stabilizer Protective Case with 4 Inner Pockets High Quality Microfiber Cleaning Cloth ULTIMAXX DJI INSPIRE 1 TRIPLE BATTERY PLATE/BOARD Parallel multi-battery charger adapter plate for DJI Inspire 1 Quadcopter battery Can charge three batteries at one time Works with original DJI battery charger Designed for DJI Inspire 1 Product Includes Parallel Triple Charger For DJI Inspire 1 ULTIMAXX BACKPACK STRAP ADAPTER Designed specifically for the original DJI Inspire 1 Case Easy to carry your Inspire 1 anywhere. With two side storage pockets Lots of padding to make your trek very comfortable. Adjustable belt and chest strap, suitable for all kinds of body shapes Product Includes Backpack Strap ULTIMAXX DJI INSPIRE 1 CARBON FIBER PROPELLERS (4) 1345 Self-tightening carbon fiber propellers (with a composite hub) These high quality carbon fiber propellers work much better than the stock propeller, the stock props or non-carbon fiber props are soft and less efficient, carbon fiber props are lighter and much stronger therefore increasing flying efficiency Fits DJI Inspire 1 quadcopter Self-tightening design keeps the propellers securely to each motor No tools required. Self-tightening design, simply rotate the propellers by hand to attach or detach Includes two pairs of propellers: 2 clockwise and 2 counter-clockwise propellers Designed for DJI Inspire 1 Product Includes 2 clockwise and 2 counter-clockwise propellers ULTIMAXX DJI MEDIUM SUNSHADE Compatible with all DJI Phantom 3 & Inspire 1 quadcopter remote controllers. Lightweight, foldable, easy to carry Monitor iPad / tablet can be easily held firmly or removed with the suction cups on the hood Velcro design, easy to install and disassemble. There is a slot on top of the shade that the stock iPad clip slides through and then the bottom of clip holds iPad and shade together Small model is 5.5 inch and fits all Iphones, Galaxy, HTC and similar size smart phones Medium model fits 7.9 inch tablets such as Ipad mini and similar size 8 inch tablets Large model fits 9.7 inch tablets such as iPad Air 2, iPad Air and similar sized 10 inch tablets Product Includes MEDIUM SUNSHADE DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal – Single Remote Capture 4K Video and 12MP Stills 3-Axis Gimbal Stabilizes Camera Up to 1.2 Mile Radio Range GPS-Based Flight Control System Vision Positioning for Indoor Flying Live 720p HD Monitoring with Lightbridge Thrust-Boosted Motors / New Propellers Retractable Carbon Fiber Arms Unobstructed 360° Shooting Dual Transmitter Operation Supported Product Includes DJI Inspire 1 v2.0 Quadcopter with 4K Camera and 3-Axis Gimbal Transmitter for Inspire 1 Quadcopter (White) Zenmuse X3 Gimbal and Camera Unit (Inspire 1 Variant) Mobile Device Holder TB47 Intelligent Flight Battery for Inspire 1 (99.9Wh, White) ND Filter Flight Battery Charger Charging Cable for Transmitter Power Cord 4 x Spare Prop CW/CCW Pairs 16GB microSD Memory Suitcase for Inspire 1 Quadcopter DJI TB47 Inspire 1 – Spare Battery (x2) Capacity of 4500mAh Intelligent Power Management LED Status Indicators Product Includes DJI TB47 Inspire 1 – Spare Battery ULTIMAXX High Speed SD/SDHC/Micro SD Reader/CARD READER Product Specifications • Easy plug & play installation • Reads & writes information from & to SD cards • Conserve camera battery life • Rapid data transfer • High Speed USB • Perfect for people on the go • Limited life time warranty MAC & PC system compatibility • Microsoft XP and Window 7 & 8 • MAC 10.4.6 or greater Product Includes SD/SDHC/Micro SD memory card reader/writer Payments SHIPPING Returns About us We accept all major credit cards PayPal PayPal Preferred Wholesale Photo makes every effort to get your order to you as soon as possible. Orders placed on business days before 8:00 AM ET (Eastern Time) are generally shipped the same day. Please note weekend orders, placed on Fridays after 1:00 PM ET will be processed on the following Monday. If there is a problem with your order, you will receive an e-mail within one business day to advise you about the situation. We can only ship to the address we receive from PayPal or eBay. Please make sure you choose the correct address when you make the payment. If you have any questions please contact us before paying and we will be happy to help. Customs & Duties International buyers are responsible for any and all customs, duties taxes and brokerage fees to be paid to the courier or government. Please contact your local customs office with further inquiries in this issue. The Pixel Hub assumes no responsibility with respect to any tariffs, duties, or any and all other charges requested or required by destination countries. We pride ourselves on a tradition of outstanding customer care and support. Our devoted team of account representatives understands that our customers are the hallmark of our enduring partnerships. It is important for our customers to understand the standards that have been established within our industry regarding the terms and conditions of a sale. The purchase of technology products and solutions are subject to manufacturer restrictions which may be different from other product purchases you transact. Most of the products and solutions we sell are subject to a manufacturer’s warranty. The warranty provided by the manufacturer is the first place to look for assistance with difficulties that may accompany your purchase. To obtain information regarding manufacturer’s warranties, please contact us and we will be glad to assist you. Non-Defective Product Return. Customers may return most non-defective items (subject to manufacturer’s return policy) to us within 30 days of invoice, either for credit or exchange. An automatic 15% restocking fee applies to all such returns. All shipping, packaging, handling and related charges are not refundable. Eligibility Conditions Please read conditions below. If all conditions are not met, Wholesale Photo reserves the right to refuse the return or to charge a restocking fee up to half the cost of the product is the conditions are not met. All returned items must be in new condition, in their original unaltered box (including an intact UPC code) and must include all packing material, blank warranty cards, manuals and accessories. Wholesale Photo is not responsible for any consequential or incidental damage resulting from the sale or use of any merchandise bought from us. We are responsible for the monetary value of the merchandise only. Defective, Damaged or Missing Items Claims for missing items or items damaged in transit must be received within two business days of receipt of merchandise. Founded by Sam Berkman in 1965, Wholesale Photo has been a leading fixture in photographic sales and photo printing in Bergen County, New Jersey for over fifty years. Wholesale Photo’s ability to meet the challenge for the past 50 years is no coincidence. Owner Les Berkman worked at Wholesale Photo since he was a teen, taking over from his father when he retired in 1985. Les has successfully led the business through enormous changes and innovations in the industry. As his customers embrace the ever changing technology, his knowledgeable staff is ready to assist them. Quick Links – Payment Details – Shipping Details – Returns – About Us – Contact Us – Store Home – Add to Favourites – New Arrivals – Ending Soon – Feedback Payment Options Secure Payments by Store Newsletter Add Store to your Favourites and receive email newsletters about new items and special promotions! © Wholesale Photo. eBay Store Designed & Developed by Wholesale Photo Buy it Now

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal With 15mm lens included Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal With 15mm lens included Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal With 15mm lens included Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI Inspire 1 v2.0 Quadcopter w/ 4K Camera & 3-Axis Gimbal For Parts Not Working

DJI Inspire 1 v2.0 Quadcopter w/ 4K Camera & 3-Axis Gimbal For Parts Not Working Comes in original case and shipping box. Parts valued at over $800.00 As Is, No Returns. Payment via Paypal only. We only ship to Paypal verified addresses. On Nov-30-16 at 07:06:16 PST, seller added the following information: I do not know what is wrong with it. It won’t power on and I tried 2 different batteries in it.