DJI Inspire 1 Quadcopter Drone, 2 remotes, 4K Zenmuse Camera/Gimbal (Free FedEx)

Reason for SellingI used this drone while I was working at Google. It was used for 3 test flights at Moffett Field in Mountain View, CA. We never crashed during these test flights. I have since moved on to a different engineering project, so the Drone is not needed anymore. Good working ConditionDrone, remote and batteries have been updated with the latest firmware. Drone has a few very minor marks on upper shell and camera has a scratch and slight marks, but everything works. *Note: it is already registered with FAA per California requirement. What do you get:See pictures reflecting marks and drone in actual flight. It includes all of the parts and extras noted below:1 DJI Inspire Quadcopter drone1 X3 4k Camera & 3-Axis gimbal2 remote controller1 standard battery1 travel cases1 charger2 spare bladesShippingI will include Free FedEx next day air shipping.

DJI Inspire 1 Pro Quadcopter with X5 Camera/Gimbal Black Edition

As an added bonus the following will be included with your purchase at no additional charge! DJI Inspire 1 Pro Black Edition​The Inspire 1 Pro Black Edition takes the DJI Inspire 1 from being an entry-level professional system and evolves it into a high-end production system. With a larger Micro 4/3 sensor, image quality, low-light performance, digitial noise, and dynamic range are all improved.Ready-to-fly aerial systemIncluded professional 4K camera and 3-axis stabilization gimbal (Zenmuse X5)Live, wireless HD video transmission via DJI LightbridgeDedicated remote with flight and camera controlsPowerful app to adjust camera settings, edit videos, and moreVision Positioning system for GPS-free or indoor flightPerfect for high-level shoots and professional setsThe Inspire 1 Pro Black comes with with Inspire 1 Quadcopter Black Edition, Zenmuse X5 Camera, Single Remote Control Black Edition, Charger, One TB47 Black Edition battery, lanyard, USB cables, and travel case.

DJI Inspire 1 Pro Quadcopter with X5 Camera/Gimbal

For a limited time, you can get big savings with the DJI Inspire 1 Essentials Suite Add-On. The DJI Inspire 1 Essentials Suite gives you a full set of usefull accessories for your Inspire 1 Quadcopter.The Essentials Suite Includes:(1) Inspire 1 Remote Control(1) Inspire 1 TB47 Battery(1) Inspire 1 Battery Heater(1) Inspire 1 4-Port Charging Hub(1) DJI Monitor Hood (iPad Mini)(2) Sets of 1345T PropsBought individually you would spend $959, with the essentials suite for $450 you save $509!!DJI Inspire 1 Pro​The Inspire 1 Pro takes the DJI Inspire 1 from being an entry-level professional system and evolves it into a high-end production system. With a larger Micro 4/3 sensor, image quality, low-light performance, digitial noise, and dynamic range are all improved.Ready-to-fly aerial systemIncluded professional 4K camera and 3-axis stabilization gimbal (Zenmuse X5)Live, wireless HD video transmission via DJI LightbridgeDedicated remote with flight and camera controlsPowerful app to adjust camera settings, edit videos, and moreVision Positioning system for GPS-free or indoor flightPerfect for high-level shoots and professional setsThe Inspire 1 Pro comes with with Inspire 1 Quadcopter, Zenmuse X5 Camera, Single Remote Control, Charger, One TB47 battery, lanyard, USB cables, and travel case.

DJI Inspire 1 with brand new 4K camera/gimbal and lots of extras

DJI Inspire 1 purchased brand new in February 2015 (manufacturers warranty active until February 2016), and I’m the original owner. Low flight hours, and everything is in great working condition. I recently had to send in the unit to DJI for an issue I had with the camera and gimbal, and they replaced the camera/gimbal with a new one. The new camera/gimbal is still brand new and has never been used. Everything works great, but I just don’t use it as much as I would like, so I’ve decided to sell it. Includes: Custom GoProfessional Cases Inspire 1 travel caseInspire 1 droneInspire 4K camera with Zenmuse 3-axis gimbal (brand new, never used)Inspire transmitter with mobile device holderx4 DJI TB47 batteriesx2 battery chargers with cables for transmitter power cordx1 ND filter and x2 clear filtersDJI tool and spare rubber shock mountsx4 sets of propellors x3 sets of transmitter lanyards Capture 4K video and take 12-megapixel still photos from the air with the DJI Inspire 1 Quadcopter with Integrated Camera and 3-Axis Gimbal. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards (16GB included) and can also beam a live 720p feed to a mobile device running the DJI Lightbridge app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera. As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an “indoor” mode which relies on Optical Flow technology – essentially a special camera – provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode). This bundle includes the Inspire 1 along with gimbal and camera, a transmitter, a flight battery, a battery charger, and a tablet holder that mounts on the transmitter. To store and transport the aircraft, a case with fitted cut-outs is included. It holds the Inspire with rotors detached, one or two transmitters, props, spare flight batteries, and more.What Ready-to-Fly Means This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flightIntegrated 4K Camera4K and HD Video Capture The Inspire 1 Camera shoots 4K video at 24p and 30p, and can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis3-Axis Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitterLive HD View A real-time feed from the Inspire 1 Camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 milesFor connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device’s battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitterModular Gimbal and Camera Inspire 1’s gimbal and camera can be removed from the aircraft for safe transport and future upgradesAirframe DesignRetractable Carbon Fiber Arms The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratioAerodynamic Design Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery lifeFlight Control SystemFly Indoors and Without GPS DJI’s Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailableApp-Based Control Software Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station SystemNote: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is requiredManual Mode Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you wantLive Map and Radar See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight pathDynamic Home Point When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point functionAuto-Takeoff and Landing Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto landTransmitter Customization Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable withTransmitter (Radio Controller)Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable batteryUse Two Transmitters For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-timeSmart Battery SystemSmart Power Management The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return homeAutomated Charging The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status