Genuine DJI Focus Remote Controller for DJI Inspire1 Pro Zenmuse X5 Series

Genuine DJI Focus Remote Controller For Inspire 1 Pro Zenmuse X5 Series We will offer free international shipping In the box: Remote controller ×1 Remote controller CAN-Bus cable ×1 Marking ring ×3 Neck strap ×1 Micro USB cable ×1 Hook-and-loop fastener ×1 Motor not included. Fully compatible with the Zenmuse X5 series. Communicates with the built-in motor of the Zenmuse X5, enabling focus and aperture control without the need for an external motor. Use the CAN-Bus cable to connect the communication port on the Focus remote controller to the CAN-Bus port on the Inspire 1 remote controller.In the box: Remote controller ×1 Remote controller CAN-Bus cable ×1Marking ring ×3 Neck strap ×1Micro USB cable ×1 Hook-and-loop fastener ×1Note: Connect the communication ports on the Focus Remote Controller and the Osmo – X5 Adapter using the *DJI Focus – Osmo Pro/RAW Adaptor Cable.Then, you can use the DJI Focus to control the aperture and focus of Zenmuse X5 series camera.

Three King Genuine DJI Accessories:Alloy Tablet Monitor Mount Bracket Holder + 9.7″ Tablet FPV Monitor Sunshade sun hood sun visor for DJI Phantom 4/3 Inspire 1 Transmitter – Gold

Package included : Extended Mount Holder x 1 + 9.7″ Sun Hood x 1

Product Features

  • Genuine DJI Accessories,A good replacement of original holder + 9.7” Tablet FPV Monitor Sunshade
  • For DJI Phantom 4/3(Not fit phantom 3 Standard) Inspire 1 Remote Controller
  • The Ipad smart phone will be stable to solve Original wiggly problem
  • This replacement mobile device holder allows you to replace the PE part of DJI original mobile device holder which is not so steady when you put on your phone or tablet, this metal part can improve this condition, make it stable
  • With replacement screws, so will not bother damaging or losing original screws

Click Here For More Information

2 Pairs Genuine DJI Phantom 3 E305 9450 Props Carbon Fiber Reinforced Self-tightening Propellers (Composite Hub, Black with White Stripes) For Phantom 3 Professional, Advanced, Phantom 2 series, Flame Wheel series platforms and the E310/E305/E300 tuned propulsion systems Black W/ white Stripes

Another masterpiece by DJI Propulsion Laboratory. Aerodynamically optimized and precisely manufactured, the Z-Blade 9450 propellers produce powerful thrust with excellent dynamic balance. These reliable blades easily handle your FPV and other payloads while keeping your platform stable and virtually vibration-free, helping reduce the chance of jello or other unwanted effects.

Product Features

  • 9450 Self-tightening Propellers (with a composite hub)
  • Recommended by DJI to be used on Phantom 3/Phantom 2 series or Flame Wheel series platforms
  • Can be used with E310/E305/E300 tuned propulsion systems.
  • Yes, these are with COMPOSITE HUB so they can be used on the Phantom 3!!!
  • Includes two pair of propellers: 2 clockwise and 2 counter-clockwise propellers

Click Here For More Information

Genuine DJI Inspire 1 Part 60 – ND16 Filter (Compatible with Inspie 1 Camera)

The ND16 filter is specifically made for the DJI Inspire 1. It helps you to reduce the amount of light coming into the sensor. It gives you the freedom to create your own work by allowing you to have more control of the camera’s aperture, exposure time and sensor sensitivity settings. Effectively, the ND16 filter helps to avoid overexposed photos. The ND16 filter passes through 1/16 of the incoming light. This is equal to a 4-stop filter strength.

Product Features

  • Genuine DJI Inspire 1 Part 60 – ND16 Filter (Compatible with Inspie 1 Camera)

Click Here For More Information

Genuine DJI Inspire 1 V2.0 – Landing Gear Riser Kit PART 72 for DJI Inspire 1 V1.0, V2.0 Pro Raw; V1.0 Upgrade Part

The Landing Gear Riser Kit is needed when mounting the Zenmuse X5 onto the Inspire 1 V2.0.

Product Features

  • Genuine DJI Inspire 1 Replacement Part #72
  • Standard equipment on Inspire 1 V2.0, Pro and Raw, Upgrade part for Inspire 1 V1.0
  • Install is simple and can be done in a few minutes
  • Make sure to thoroughly clean the inspire 1 landing gear before install the riser kits
  • Includes 6 Risers and 6 Tape Pads

Click Here For More Information

Genuine DJI Phantom 3 Prop Guard Part #2 Propeller Guards For Professional Advanced

One set of DJI Phantom propeller guards. Includes 4 prop guards customized for the Phantom 3 series. Designed to protect your propellers during collisions, they help you fly with confidence, whether you are a beginner or an expert quadcopter pilot. This set is compatible with Phantom 3 Professional and Phantom 3 Advanced.

Product Features

  • DJI Part 2 Propeller Guard – Safety Cord – DJI Warranty
  • Protects your Phantom from prop damage
  • Lightweight and durable
  • Sized for use with 9″ propellers
  • Includes safety cord to prevent objects from entering spaces between guards

Click Here For More Information

Genuine DJI Inspire 1 – Phantom 3 Remote Controller Monitor Hood (for Tablets) (Sun hood, Sunshade, Sunhood, Monitor shade) Compatible with iPad Mini and majority of small-form factor tablet devices

The Monitor Hood shields your tablets from direct sunlight to give you a perfectly clear view of your display. Collapsible and easy to carry, the hood can be installed on the remote controllers for Inspire 1 and P3 Advanced/Professional. Compatible with iPad Mini and majority of small-form factor tablet devices. Maximum device size: 205mm*145mm*128mm *It comes with Velcro for connection.

Product Features

  • Compatible with iPad Mini and majority of small-form factor tablet devices.
  • Maximum device size: 205mm*145mm*128mm
  • The Monitor Hood shields your tablets from direct sunlight to give you a perfectly clear view of your display
  • Collapsible and easy to carry, the hood can be installed on the remote controllers for Inspire 1 and P3 Advanced/Professional
  • Comes with Velcro for connection.

Click Here For More Information

Genuine DJI Inspire One Spare Part No.40 Gimbal and camera unit, Free Ship 4KCam

Even our buy it now price is below the new purchase price for this camera and gimbal. We give free shipping to USA. We used this for 8 total hours of flight on an Inspire One. It is scratch free (everything), and is in like new condition. Notice we have 100% buyer ebay satisfaction! Bid with confidence! Everything is included (i.e. filter and lens protector, extra gimbal rubber guards.) It comes with the DJI factory storage case designed to fit into the DJI Inspire One storage case. This is a 4K camera that shoots amazing footage! It is designed to pop on and off of the DJI Inspire One. We decided we did not need this extra Inspire One in our fleet, so we are “parting” it out for those who have damaged their camera/gimbal. (See our other auctions for the Inspire One and case, 3 slightly used batteries, battery charger and range extended Inspire One modified radio. DJI does not supply parts and so we are thinking it worthwhile to sell the Inspire off to folks who have crashed their birds and don’t need to rebuy the whole 3K kit all over again.) Factory Specs:The Inspire 1 Gimbal and Camera Unit from DJI features the same 4K camera and 3-axis gimbal that is included with ready-to-fly versions of the Inspire 1 quadcopter. It can be used with Inspire 1 – mounting toolessly – or works with the Inspire 1 Camera Mount. The Camera Mount is a separately available handgrip that converts the Gimbal and Camera Unit into a stabilized handheld camera system for use closer to the ground. The gimbal and camera both power from the aircraft flight battery or from a battery that goes with the Camera Mount.Inspire 1 4K Camera The Inspire 1 Camera shoots 4K video at 24p and 30p, and can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis3-Axis Brushless Motor Gimbal The camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter CameraModelName: X3Designation: FC350SensorSony EXMOR 1/2.3″ CMOSResolution12.0 MPLensField of View: 94°Focal Length (35 mm Equivalent): 20 mm Aperture: f/2.8Design: 9 elements in 9 groups; aspherical lens elementFilters: Anti-distortion filter; UV filterVideo RecordingUHD (4K):4096 x 2160: 24p, 25p3840 x 2160: 24p, 25p, 30pFHD (1080p):1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60pHD (720p):1280 x 720: 24p, 25p, 30p, 48p, 50p, 60pMaximum Bitrate: 60 Mbp/sFile FormatPhoto: JPEG, DNGVideo: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)Recording MediaType: microSD/SDHC/SDXC up to 64 GBSpeed: Class 10 or fasterFormat: FAT32/exFATPhotography ModesSingle shotBurst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)Time-lapseOperating Temperature32 to 104°F / 0 to 40°CGimbalModelZenmuse X3Number of Axes3-axisControl Accuracy±0.03°Maximum Controlled Rotation SpeedPitch: 120°/sPan: 180°/sControlled Rotation RangePitch: -90° to +30°Pan: ±330°Angular Vibration Range±0.03°Output PowerStatic: 9 WIn Motion: 11 WOperational CurrentStatic: 750 mAIn Motion: 900 mAMountingDetachablePackaging InfoPackage Weight0.85 lbBox Dimensions (LxWxH)4.8 x 4.4 x 3.4″

Genuine DJI Inspire 1 Battery Charging Hub for TB48 & TB47 Smart Batteries

Small and easy to carry, the Inspire 1 Battery Charging Hub enables you to charge up to four Inspire 1 Intelligent Flight Batteries. When used, the charging hub automatically selects the individual battery with the highest amount of remaining power, and charges it until full before moving on to the next battery. The entire process is monitored and each battery’s status is shown using LED indicators, making the charging process simple and easy. Used together with the Inspire 1 charger and cord. Compatible with TB47 and TB48 battery models.

Product Features

  • Intelligent charging management, capable of automatically charging up to four batteries.
  • Each battery’s status is shown using LED indicators; Small and easy to carry
  • Internal power management ensures safety at all times; Integrated port enables future firmware updates
  • Compatible with both Inspire 1-100W Charger and Inspire 1-180W Rapid Charger
  • Compatible with both TB47 and TB48 battery models

Click Here For More Information

Genuine DJI Inspire 1 Part 45 Battery Charging Hub for Multi Smart Battery Charging (Compatible with both Inspire 1-100W Charger and Inspire 1-180W Rapid Charger; Compatible with both TB47 and TB48 battery models)

Small and easy to carry, the Inspire 1 Battery Charging Hub enables you to charge up to four Inspire 1 Intelligent Flight Batteries. When used, the charging hub automatically selects the individual battery with the highest amount of remaining power, and charges it until full before moving on to the next battery. The entire process is monitored and each battery’s status is shown using LED indicators, making the charging process simple and easy. Used together with the Inspire 1 charger and cord. Compatible with TB47 and TB48 battery models.

Product Features

  • Intelligent charging management, capable of automatically charging up to four batteries.
  • Each battery’s status is shown using LED indicators; Small and easy to carry
  • Internal power management ensures safety at all times; Integrated port enables future firmware updates
  • Compatible with both Inspire 1-100W Charger and Inspire 1-180W Rapid Charger
  • Compatible with both TB47 and TB48 battery models

Click Here For More Information

Genuine DJI Inspire 1 – Phantom 3 Remote Controller Monitor Hood (for Smartphones) (Sun hood, Sunshade, Sunhood, Monitor shade) Compatible with iPhone 6 Plus and majority of smartphone devices

The Monitor Hood shields your smartphones from direct sunlight to give you a perfectly clear view of your display. Collapsible and easy to carry, the hood can be installed on the remote controllers for Inspire 1 and P3 Advanced/Professional. Compatible with iPhone 6 Plus and majority of smartphone devices. Maximum device size: 165mm*87mm*85mm *It comes with Velcro for connection.

Product Features

  • The Monitor Hood shields your smartphones from direct sunlight to give you a perfectly clear view of your display
  • Collapsible and easy to carry, the hood can be installed on the remote controllers for Inspire 1 and P3 Advanced/Professional
  • Compatible with iPhone 6 Plus and majority of smartphone devices
  • Maximum device size: 165mm*87mm*85mm
  • Comes with Velcro for connection

Click Here For More Information

Genuine DJI E800 Tuned Propulsion System Props 1345s Self-locking Carbon Fiber Reinforced Quick Release Propellers (CW + CCW) 4 Pcs Compatible with Inspire 1 Quadcopter (this version does not require DJI safety lock) – Yellow Stripe

This Genuine DJI E800 Tuned Propulsion System Props 1345s Self-locking Carbon Fiber Reinforced Quick Release Propellers (CW + CCW) 4 Pcs Compatible with Inspire 1 Quadcopter (this version does not require DJI safety lock) – Yellow Stripe features a new locking mechanism that prevents your propellers from becoming loose during flight.

Product Features

  • DJI original product. Compatible with DJI Inspire 1 quadcopter (1345s self-locking propellers do not require DJI safety lock) and E800 Tuned Propulsion System
  • Note, it needs to be mounted on Ф22 quick release rotor adapter (please purchase the adapters if you do not have them)
  • Perfectly suited to the motor deceleration functions native to your Inspire 1
  • Enhances reliability during flight. Features a new locking mechanism that prevents your propellers from becoming loose during flight
  • Package included: CW Propeller x 2; CCW Propeller x 2 (DJI motor is NOT included); A free gift is included (Random item shipped)

Click Here For More Information