DJI Original Inspire 1 Quadcopter Left and Right Arm Supports Part 33 by DJI

Brand: DJI, Compatible with DJI Inspire 1 quadcopter, Part No.33, Package included: Left Arm Support x 1; Right Arm Support x 1; Screws, Free touch screen stylus pen is included (Random color shipped)

Product Features

  • DJI Original Inspire 1 Quadcopter Left and Right Arm Supports Part 33

Click Here For More Information

DJI Part 69 1345T Quick-Release Propeller for Inspire 1 Quadcopter, Pair (Clock Wise Propeller, Counter Clock Wise Propeller)

A pair of propellers, one clockwise replacement propeller and one counter-clockwise replacement propeller, compatible with the Inspire 1, Inspire 1 V2.0 and Inspire 1 Pro. When mounting to the Inspire 1, use the Inspire 1 Series – 1345T Propeller Installation Kit.

Product Features

  • Quick-Release Propeller

Click Here For More Information

DJI Inspire 1/V2.0 Matrice 100 Part 40 Zenmuse X3 4K Camera Gimbal & Damper Unit

DJI AUTHORIZED DEALER HOUSTON100% AUTHENTIC DJI PRODUCT GUARANTEED PRODUCT HIGHLIGHTS Capture 4K Video and 12MP StillsSony EXMOR 1/2.3″ CMOS Sensor3-Axis Gimbal Stabilizes CameraWide 94° FOV LensGimbal Control Accuracy: ±0.03°Panning: Full 360°Pitch: -90 to and 30°JPEG and DNG RAW Photo CaptureWorks with Osmo Handle KitRecords to microSD CardsComes with Part 42 gimbal dampers plus EVA packing foam OVERVIEWThe Zenmuse X3 Gimbal and Camera Unit from DJI features the same 4K camera and 3-axis gimbal that is included with ready-to-fly versions of the Inspire 1 quadcopter. It can be used with Inspire 1 – mounting toolessly – or works with the Osmo Handle Kit. The Osmo Handle Kit is a separately available handgrip that converts the Gimbal and Camera Unit into a stabilized handheld camera system for use closer to the ground. The gimbal and camera both power from the aircraft flight battery or from a battery that goes with the Handle Kit.Inspire 1 4K CameraThe Inspire 1 Camera shoots 4K video at 24p and 30p, and can shoot HD video frame rates from 24p to 60p. It features a 1/2.3″ CMOS sensor with a 94-degree field of view (FOV) lens. This field of view works out to about 20mm in 35mm equivalent, which gives you a wide but not extremely wide or fisheye framing – while not as immersive as a fisheye, this FOV features less distortion and gives the subject more emphasis3-Axis Brushless Motor GimbalThe camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitter CameraModelName: X3Designation: FC350SensorSony EXMOR 1/2.3″ CMOSResolution12.0 MPLensField of View: 94°Focal Length (35 mm Equivalent): 20 mm Aperture: f/2.8Design: 9 elements in 9 groups; aspherical lens elementFilters: Anti-distortion filter; UV filterVideo RecordingUHD (4K):4096 x 2160: 24p, 25p3840 x 2160: 24p, 25p, 30pFHD (1080p):1920 x 1080: 24p, 25p, 30p, 48p, 50p, 60pHD (720p):1280 x 720: 24p, 25p, 30p, 48p, 50p, 60pMaximum Bitrate: 60 Mbp/sFile FormatPhoto: JPEG, DNGVideo: MP4 in a .MOV wrapper (MPEG-4 AVC/H.264)Recording MediaType: microSD/SDHC/SDXC up to 64 GBSpeed: Class 10 or fasterFormat: FAT32/exFATPhotography ModesSingle shotBurst: 3, 5, 7 frames per second (AEB: 3/5 frames per second; 0.7 EV bias)Time-lapseOperating Temperature32 to 104°F / 0 to 40°CGimbalModelZenmuse X3Number of Axes3-axisControl Accuracy±0.03°Maximum Controlled Rotation SpeedPitch: 120°/sPan: 180°/sControlled Rotation RangePitch: -90° to +30°Pan: ±330°Angular Vibration Range±0.03°Output PowerStatic: 9 WIn Motion: 11 WOperational CurrentStatic: 750 mAIn Motion: 900 mAMountingDetachable

DJI Inspire 1 Part 63 Plastic Suitcase(With Inner Container)

Designed for the Inspire 1, the outside shell of this carrying case is made with ABS, a material that’s both strong and light.
On the inside, the highly resilient EPP material is used to help absorb pressure and vibrations.
Besides protecting your Inspire 1 and all its accessories from collisions, the case is also moderately water-resistant.
Material: ABS (Outside), EPP (Inside)
Color: Black
Size: Approx. 56cm long x 50cm wide x 24cm high
Capacity:
Inspire 1 x 1
Inspire 1 Remote Controller x 2
Inspire 1 Intelligent Battery x 5
Inspire 1 Propellers x 4
Inspire 1 Battery Charger x 1

Click Here For More Information

DJI Inspire 1 Pro Zenmuse X5/ X5R Camera Gimbal Part 2 Vibration Absorbing Board

PRODUCT HIGHLIGHTS Mount Zenmuse X5/X5R Camera on Inspire 1 Provides Isolation from Motor Vibration Quick-Release Attachment Mechanism Includes Landing Gear Riser Kit OVERVIEW This Vibration Absorbing Board from DJI allows you to mount a Zenmuse X5 or X5R camera/gimbal system to the Inspire 1 Quadcopter. It features rubber dampers that serve to isolate the camera from vibrations generated by the motors. A locking quick-release mechanism allows the camera and gimbal to be removed easily when breaking the Inspire 1 down for storage or transport. The Landing Gear Riser Kit is included to provide the extra clearance the main gimbal camera assembly requires.

Product Features

  • DJI Inspire 1 Pro Zenmuse X5/ X5R Camera Gimbal Part 2 Vibration Absorbing Board
  • Mount Zenmuse X5/X5R Camera on Inspire 1
  • Provides Isolation from Motor Vibration
  • Quick-Release Attachment Mechanism
  • Includes Landing Gear Riser Kit

Click Here For More Information

DJI Inspire 1/V2.0/Pro WM610 Drone Part 2 Center Frame Assembly FXZY

This is the hard to get center unit that raises and lowers the landing gear on the Inspire 1, Inspire 1 V2.0, Inspire 1 Pro.

Product Features

  • DJI Inspire 1/V2.0/Pro WM610 Drone Part 2 Center Frame Assembly FXZY
  • This is the hard to get center unit that raises and lowers the landing gear
  • Inspire 1 V2.0, Inspire 1 Pro

Click Here For More Information

DJI Inspire 1 T600 Drone WM610 Part 4 5 3510 350KV Brushless CW CCW Motor, ESC

The DJI Inspire 1 PART4 Clockwise Rotating Motor (CW) with Electronic Speed Control (ESC)”WM610 3510 is specially designed for Inspire 1(T600 )Quadcopter. The DJI Inspire 1 PART5 Counterclockwise Rotating Motor (CCW) with Electronic Speed Control (ESC)”WM610 3510 is specially designed for Inspire 1(T600 )Quadcopter.

Product Features

  • DJI Inspire 1 T600 Drone WM610 Part 4 5 3510 350KV Brushless CW CCW Motor, ESC
  • DJI Inspire 1 PART 4 Clockwise 3510 Motor (CW) with Electronic Speed Control (ESC)
  • DJI Inspire 1 PART 5 Counterclockwise 3510 Motor (CCW) with Electronic Speed Control (ESC)
  • WM610 3510 is specially designed for Inspire 1(T600 )Quadcopter.

Click Here For More Information

2 Pairs Geniune DJI Inspire 1345T Quick Release Propellers for Inspire 1, Inspire 1 V2.0, Inspire 1 Pro – Part 69 OEM in Original DJI Package with Luckybird USB Reader 1pc

The 2 pairs DJI 1345T Quick-Release Props for Inspire 1 is a two-pack that features two pieces clockwise (CW) and two pieces counterclockwise (CCW) prop. It works with the Inspire 1 Pro and RAW as well as any earlier generation Inspire 1 that has the 1345T quick-release adapter installed. Featuring quick-release attachment, the props can be snapped on or off as needed without being unscrewed. As there are two rotational directions, please refer to the user guide to ensure that you replace a CW prop with a new CW prop and a CCW prop with a CCW prop.
Note: These rotors require the 1345T Quick-Release Rotor Adapters (available separately), which must be installed before installing the props. These adapters are standard with the Inspire 1 Pro and RAW.
They will not work with the 1345s quick-release adapter.
Package Included:
2 Pairs x DJI original 1345T Propellers;
1 x Luckybird Usb reader.

Product Features

  • DJI Inspire 1 1345T Quick Release Props (2 Pairs);
  • Compatible with the Inspire 1, Inspire 1 V2.0 and Inspire 1 Pro.
  • Two pairs of propellers, two clockwise replacement propellers and two counter-clockwise replacement propellers;
  • Color:Black;
  • Easy installation for replacement.

Click Here For More Information

DJI Inspire 1 Part 40 Gimbal and Camera Unit + 64GB Memory Card + Reader + Lens Cleaning Pen + Dust Blower

Capture 4K Video and 12MP Stills
Sony EXMOR 1/2.3″ CMOS Sensor
3-Axis Gimbal Stabilizes Camera
Wide 94° FOV Lens
Gimbal Control Accuracy: ±0.03°
Panning: Full 360°
Pitch: -90 to and 30°
JPEG and DNG RAW Photo Capture
Works with Inspire 1 Camera Mount
Records to microSD Cards

Package Includes:
DJI Inspire 1 Part 40 Gimbal and Camera Unit
High Speed Memory Card Reader
64GB Micro SD Memory Card
High Quality 2 in 1 Lens Cleaning Pen
Dust Blower
Microfiber Cleaning Cloth

Product Features

  • DJI Inspire 1 Part 40 Gimbal and Camera Unit
  • 64GB Micro SD Memory Card + High Speed Memory Card Reader
  • High Quality 2 in 1 Lens Cleaning Pen
  • Dust Blower
  • Microfiber Cleaning Cloth

Click Here For More Information