This Inspire 1 v1.0 was used exclusively by the UAVDirect team for demonstrations. Because of that, it is in excellent condition and has been well maintained by the UAVDirect techs who are DJI certified. Maintenance was done in accordance with DJI guidance and UAVDirect practices. Firmware has been continually updated in a sequential manner. This Inspire 1 system would be a great choice for someone just starting in the professional drone industry. It is fully compatible with other DJI professional cameras such as the Z3 zoom camera, the X5 micro four-thirds, and the XT thermal cameras. The system includes:- Inspire 1 v1.0 Drone- Inspire 1 Remote Control- DJI TB47 Flight Battery – DJI Flight Battery Charger (not pictured)- 8 Props (Only 4 pictured)- DJI Inspire 1 travel case After purchasing, the drone system will be professionally fulfilled by the UAVDirect team, and shipped via FedEx ground insured. Signature will be required for delivery.
Up for an auction is an Inspire that has never been crashed, this auction includes everything that is regularly included with the Inspire, from factory or brand new but only an 8GB sd card and also a battery with a broken cell. Everything else is the same, and comes with one full extra set of rotors. Payment is due within 24 hours after the auction ends, ships insured, and signature required. Thank youOn Feb-04-17 at 06:44:37 PST, seller added the following information: Just the end the confusion , total number of batteries included with this auction is 3, 1 has a broken cell, none the less you’ll be receiving 3 batteries.
Hey guys thank you for looking at my auction today you are bidding on a great condition DJI inspire drone, x3 camera in great condition. I bought this brand new from an authorized dealer and used it 3 times and it since then has been sitting NOT being used in over a year so it’s time to sell it, because I have not used it in over a year it will need software updates, and you will need to complete those, you’ll also need a microSD card. Included is: Drone X3 camera 4 batteries (1 of the 4 is swollen/blown/not working but may be under warranty so I included it anyways) 8 blades (4 new in bag) Controller Case Charger for batteries and controller Original manuals EVERYTHING SHOWN IN PICTURES
Used, in excellent condition, never have a chance to play with it since I bought it from another seller. One out of the four batteries is brand new. I might have left out some of the stuff in the bundle descriptions below, but everything you see in the pictures are included! Since I never play with it before, I cannot offer you any more details about it. Please do your research before bidding. Thank you! This bundle comes with the following:X3 4K Camera4 TB47 Batteries2 Sets of PropsKazoom inspire backpack adapter2 ND filters. ND 16 and ND 8X5 + X3 Mounting bracket
DJI Inspire 1 V.1.0 with lots of extra accessories Spare unit that has very low flight time. Never crashed or damaged and flys beautifully. Includes custom 1/4 x 20 accessory mount installed on rear bottom of drone. Perfect to add a second FPV camera like GoPro or Flir Vue Pro. Includes two circular polarizing/ND filters that greatly improved image quality. These cost $120 from Snake River Prototyping and are the best made. IN THE BOX: 1 x Inspire 1 V1.01 x Remote Control2 x Sets of Propellers – 4 Pairs of Propellers (one original set, one newer style)2 x Intelligent Battery TB47 (excellent condition)1 x Battery Charger1 x Power CableManual 1 x X3 Camera and 3 Axis Gimbal1 x 16gb SD Card1 x Micro USB CableExtras include:1 x SRP i1 Series ND8/CP Filter ($60 from Snake River Prototyping)1 x SRP i1 Series ND16/CP Filter ($60 frome Snake River Prototyping) 1 x clear lens filter1 x standard ND filter1 x microfiber lens cloth1 x Lens Cap1 x DJI Transmitter Harness1 x spare set of camera vibration isolators1 x spare Micro USB Cable1 x Transport Case Quick FeaturesReady-to-fly aerial systemIncluded professional 4K camera and 3-axis stabilization gimbalLive, wireless HD video transmission via DJI LightbridgeDedicated remote with flight and camera controlsPowerful app to adjust camera settings, edit videos, and moreVision Positioning system for GPS-free or indoor flightPerfect for high-level shoots and professional sets
The Inspire was hung up in a tall tree for the winter. Battery will not charge as it was probably frozen. Two of the blades are fine, two are damaged. Do not have another battery to test it, so no idea whether it will work or not, no other visible damage other than the two blades. No controller, what you see is what you get, including the camera.
DJI Inspire 1 V.1.0 IN THE BOX: 1 x Inspire 1 V1.01 x Remote Control2 x Sets of Propellers – 4 Pairs of Propellers1 x Intelligent Battery1 x Battery Charger1 x Power CableManual 1 x X3 Camera and 3 Axis Gimbal1 x 16gb SD Card1 x Micro USB Cable Quick FeaturesReady-to-fly aerial systemIncluded professional 4K camera and 3-axis stabilization gimbalLive, wireless HD video transmission via DJI LightbridgeDedicated remote with flight and camera controlsPowerful app to adjust camera settings, edit videos, and moreVision Positioning system for GPS-free or indoor flightPerfect for high-level shoots and professional sets
This Inspire 1 is in perfect condition. Never crashed or so much as a hard landing. You won’t find so much as a nick on any of the props. I haven’t flown it at all this year and that killed the main aircraft battery. Remote battery is fine. So I’m selling it without the battery. Everything else is included: Extra props, filters, straps, charger, tools, everything it came with is included. Even most of the wrappings. Yes, I saved the original box and yellow straps. It is 100% stock DJI with the exception of the eye ball stickers I added. Looks 10X more menacing that way doesn’t it?
Excellent condition DJI Inspire 1 V1.0. Includes a travel backpack, 2 batteries (one high mAh TB48), a lead battery bag to carry on planes, charger, remotes, case, camera, camera case, lens filter, cables, extra grommets, manual case. From DJI: AIRCRAFT ModelT600 Weight (Battery Included)2935 g Hovering Accuracy (GPS mode)Vertical: 0.5 m Horizontal: 2.5 m Max Angular VelocityPitch: 300°/s Yaw: 150°/s Max Tilt Angle35° Max Ascent Speed5 m/s Max Descent Speed4 m/s Max Speed22 m/s (ATTI mode, no wind) Max Service Ceiling Above Sea Level4500 m (Default altitude limit: 120 m above takeoff point) Max Wind Speed Resistance10 m/s Max Flight TimeApproximately 18 minutes Motor ModelDJI 3510H Propeller ModelDJI 1345T Indoor HoveringEnabled by default Operating Temperature Range-10° to 40° C Diagonal Distance559 to 581 mm Dimensions438x451x301 mm Power Spectral Density9.06mW/MHz CAMERA NameX3 ModelFC350 Total Pixels12.76M Effective Pixels12.4M Image Max Size4000x3000 ISO Range100-3200 (video) 100-1600 (photo) Electronic Shutter Speed8s － 1/8000s FOV (Field of View)94° CMOS1/2.3” CMOS Lens20mm (35mm format equivalent)f/2.8 focus at ∞ 9 Elements in 9 groups Anti-distortion Still Photography ModesSingle shoot Burst shooting: 3/5/7 frames Auto Exposure Bracketing (AEB): 3/5 bracketed frames at 0.7EV Bias Time-lapse Video Recording ModesUHD (4K): 4096x2160p24/25, 3840x2160p24/25/30 FHD: 1920x1080p24/25/30/48/50/60 HD: 1280x720p24/25/30/48/50/60 Max Bitrate of Video Storage60 Mbps Supported File FormatsFAT32/exFAT Photo: JPEG, DNG Video: MP4/MOV (MPEG-4 AVC/H.264) Supported SD Card TypesMicro SD Max capacity: 64 GB. Class 10 or UHS-1 rating required. Operating Temperature Range0° to 40° C CHARGER ModelA14-100P1A Voltage26.3 V Rated Power100 W BATTERY (OPTIONAL) NameIntelligent Flight Battery ModelTB48 Capacity5700 mAh Voltage22.8 V Battery TypeLiPo 6S Energy129.96 Wh Net Weight670 g Operating Temperature Range-10° to 40° C Storage Temperature RangeLess than 3 months: -20 to 45° C More than 3 months: 22° to 28° C Charging Temperature Range0° to 40° C Max Charging Power180 W DJI GO APP Mobile Device System RequirementsiOS 8.0 or later, Android 4.1.2 or later Supported Mobile Devices ios: iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPod touch 6, iPad Pro, iPad Air, iPad Air Wi-Fi + Cellular, iPad mini 2, iPad mini 2 Wi-Fi + Cellular, iPad Air 2, iPad Air 2 Wi-Fi + Cellular, iPad mini 3, iPad mini 3 Wi-Fi + Cellular, iPad mini 4, and iPad mini 4 Wi-Fi + Cellular. This app is optimized for iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s and iPhone 6s Plus. Android: Samsung tabs 705c, Samsung S6, Samsung S5, Samsung NOTE4, Samsung NOTE3, Google Nexus 9, Google Nexus 7 II, Ascend Mate7, Huawei Mate 8, Nubia Z7 mini, SONY Xperia Z3, MI 3, MI PAD *Support for additional Android devices available as testing and development continues.
OPEN BOX. NEW CONDITION. FULLY TESTED IT FOR FUNCTIONAL. COMES WITH THE CASE, MANUAL, BATTERY CHARGER, USB CABLE, PROPELLERS AND A FEW OTHER ACCESORIES. (PLEASE CHECK PICS) NO CAMERA, BATTERY, REMOTE OR ANY OTHER ACCESORIES ARE INCLUDE IT. PLEASE CHECK PICS TO SEE WHAT IS INCLUDE IT. PICTURES SHOWS THE REAL ITEM WITH SERIAL NUMBERS. THIS UNIT HAS BEEN FULLY TESTED IT AND THERE IS NOTHING WRONG WITH IT.
DJI Inspire version 1 quadcopter, sold without camera and can be used with either the Zenmuse X5, X5R, or original X3 camera. The X5 Vibration board ($100 value) is already installed (pro version). Included:Inspire 1 quadcopter version 1case (handle is broken)paired remote control1345T quick-release props (x4)100W charger1 TB47 Battery This Inspire dropped from a few feet up and broke the camera, (which is why there is no camera included in this listing). There is no damage to the well-maintained craft. Flight tested, fully functional and latest firmware for controller and craft has been installed (Inspire 1 Pro Firmware v126.96.36.199). This Inspire is ready to fly.
DJI Inspire Quadcopter, sold without camera and can be used with either the Zenmuse X5, X5R, or original X3 camera. The X5 Vibration board ($100 value) is already installed (pro version). Comes with HPRC custom rolling case with foam inserts (originally a $300 case), paired remote control, quick-on props plus 2 spares, charger, 1 TB47 Battery, tablet lens hood/shade, original instruction manual, and shoulder strap for controller. Also includes the original X3 vibration board that the Inspire1 ships with, in case you ever want to revert to the non-Pro setup. Never crashed, well-maintained craft. Foam inserts in the case were originally for the non-pro Inspire setup, so I slightly recut them to fit the craft. Firmware will need to be upgraded once you install a camera, but otherwise totally ready to fly.