DJI Phantom Inspire 1 Model T600 Drone Zenmuse X3 4K Camera GL658B Remote + Case

Previously used – Very Good Condition. Listing is for used drone (& accessories) that are in very good condition. The drone has been tested and it is working properly. Flight was verified and it did not have any issues. There are some light handling marks, but no heavy wear or damage. There are no signs of collision, or any kind of heavy wear/damage. A total of 8 black rotors are included. 4 of the rotors are in package and 4 have been used. Two batteries are included, both are 4500mAh, model TB47-4500-22.2-6SBatteries hold a good charge. The included camera is a Zenmuse X3, 4K Video & 12MP stillsThe included remote is a GL658B (remote works great too)Charger and 2 usb cables are also included. Also comes with the following: Hoodman Aviator HAV6DJ1 Controller StrapDJI Foam Padded Inspire 1 Zipped CaseLexar 633X 16GB Micro SD Card All of the pictures are of the actual drone and accessories that you will receive. In the album below you can find many more high resolution pictures of the drone and accessories. Sorry, but I am not looking to end the listing early. Please do not send me any offers – No “buy it now”. SEE PICTURES Shipping: Shipping to a confirmed address in the 48 states will be $20.00 Alaska, Hawaii and all US Territories may incur an additional shipping cost… please ask for a quote before bidding.I may be able to ship smaller items to Canada. Please ask me for quote before bidding. Sorry, but I am only accepting bids from the USA, and those that I approve from Canada.Please pay with PayPal, good luck!Colorado residents please pay sales tax. P35-295330-1

DJI ZENMUSE X5 4K Video 16MP Camera 3-Axis Gimbal for INSPIRE 1 /1 PRO with Lens

Brand New Unopened Unit!! No Reserve!! DJI ZENMUSE X5 Pro 4K Camera and 3-Axis Gimbal With 15mm lens included Zenmuse X5 4K video at up to 30fpsRecord at 4096×2160 (24fps) or 3840×2160 (30/25fps)16MP photographs12.8 stops of dynamic rangeNote:When using the Zenmuse X5 Series cameras, it is necessary to replace the original vibration absorbing board designed for the Inspire 1’s standard Zenmuse X3 camera with the Zenmuse X5 Vibration Absorbing Board. Zenmuse X5 cameras require an adaptor for use with Osmo that is sold separately.

DJI Inspire 1 V2.0 with Zenmuse X3 Camera

$1,999 on!!!! Get it here FOR A STEAL!!! **NOTE** The iPad in the pictures is NOT INCLUDED. You are bidding on a used (but working flawlessly) DJI Inspire 1 V2.0 with Zenmuse X3 aerial camera. Comes with remote controller, X3 camera and gimbal case TB47 4500mAh battery SN W19ACK06010241, battery charger, 4 1345T quick-release propellers and 3 extra sets of props, harness, spare filter kit, all manuals and carrying case. There is NO SD card included. The drone works great! The TB47 battery is 100% charge capable, has 18 charges on it and has a max capacity now of 4230 mAh. Happy bidding! From the DJI website: ADVANCED, READY-TO-FLY DESIGN Imagine holding the future in your hands. Designed to be powerful while lightweight, flexible while providing the stability you need, the Inspire 1 is DJI’s most advanced complete package. All of the latest aerial technology is packed into one simple, ready-to-fly system, putting you in the sky within minutes. POWERFUL PROPULSION SYSTEM The Inspire 1’s propulsion system is unique among all flight platforms. We re-engineered and re-built the system to handle the demands of advanced flight, while increasing efficiency and reliability. AERODYNAMIC TRANSFORMING DESIGN Carbon fiber arms give you the strength to maneuver in the air and they transform, moving out of the camera’s way at the flick of a switch. With a full 360⁰ unobstructed view, you now have the freedom to capture shots independent of the direction you are flying. Every part, every component of the Inspire 1 was engineered to be durable and lightweight. The body’s aerodynamic design cuts through the sky and further enhances your control over the aircraft. This ensures long flight times and a long operational life. MODULAR, UPGRADEABLE SYSTEM Inspire 1’s gimbal and camera system can be removed from the aircraft for safe transport and future upgrades. NEW CAMERA AND GIMBAL SYSTEM Get crystal clear images with DJI’s most advanced camera to date. The gimbal holding your camera is the result of DJI’s years of expertise in camera stabilization, giving you smooth, stable footage in any flight conditions. Video: 4K @ 24-30 fps, or 1080p @ 24-60fps, Photos: 12 Megapixels Lens: 9 elements in 9 groups including an aspherical element 1/2.3 inch CMOS sensor 94⁰ wide-angle FOV 3-axis, 360⁰ rotating gimbal LIVE HD VIEW A beautiful, 720p HD view shows you exactly what your camera sees at all times. Frame your shots and fly as though you‘re in the sky yourself. This is made possible by an all new and improved version of DJI’s Lightbridge technology which can transmit video from up to 5km away. CREATE TOGETHER For an even greater level of precision, use a second remote controller and fly with a friend. With two operators controlling the same Inspire 1, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-time. By working in tandem, you’re capturing shots that are more complex and artistic than ever before. FLY INDOORS AND WITHOUT GPS USING VISION POSITIONING SYSTEM Indoor flight has always been a true test of skill for all levels of pilots. DJI’s new Vision Positioning technology uses a specially designed camera as well as sonic waves to bring simplicity to flying indoors. This technology allows the Inspire to hold its position, stop when the controls are released, and respond to your commands even when GPS is unavailable. INTELLIGENT POWER MANAGEMENT SYSTEM A fully integrated intelligent battery powers your Inspire 1 and virtually manages itself. When in flight, your remaining battery power is shown live, letting you know how long you can continue to fly. Advanced algorithms calculate the distance of your aircraft and estimated time to return home, letting you know when it’s time to fly back. The battery reports the voltage of each cell, the total lifetime charges and discharges, and the overall health and battery status. All this helps you keep your Inspire 1 in the air and flying for years to come. POWERFUL MOBILE APP Complete power is at your fingertips. Control the camera and change flight settings, all from your mobile device. Plus: Compatible With Most DJI Products Live HD View Instant Video Downloading Easy Video Editor Comprehensive Media Library Sharing and Connecting Creativity Live Map and Radar Detailed Records and Achievements Manage Your DJI Account DEDICATED CONTROLS Take absolute control of your Inspire 1 with DJI’s most sophisticated remote controller to date. Featuring dedicated buttons for photo and video capture, a gimbal control dial, an integrated rechargeable battery and more, it’s easy and intuitive to fly. The controller has an mini-HDMI and USB port allowing you to connect mobile devices or compatible screens. EASY, SAFE FLIGHT Even if you’ve never flown before, taking off and landing your Inspire 1 is easy and safe. It takes just one tap to make your Inspire 1 takeoff and transform, ready to start filming. Then tap again to have it transform into landing mode and land. When GPS is available, the Home Point (the location you are standing) automatically refreshes, so your Inspire 1 always knows where you are even if you move around. When you tell it to come back, or in case of an emergency, it knows exactly where to go and land safely. A COMPLETE READY-TO-FLY SYSTEM Everything you need is included and ready to go, offering you a complete aerial filmmaking tool in one box. Just add your mobile device or other screen to use the live HD view.

DJI Inspire 1 Professional Quadcopter with New Zenmuse X3 Camera

DJI Inspire 1 Professional, version 1.0 in Excellent condition. This is a professional grade drone and has a 360° gimbal to capture cinematic video in stunning 4K 2K4-30fps or UHD 2.7K 30fps. Sent Zenmuse X3 camera off for repair and DJI sent back a new one!! Replaced cracked X3 Vibration Board Gimbal Mount With NEW Mount & NEW Rubber dampers. This quadcopter runs like new with no issues.with recently updated firmware, ready to fly. This has two (2) sets of updated quick release propellers and two sets of original propellers with safety locks. Probably the most awesome looking drone out there!! Very easy to fly and can be upgraded to better camera or 2 remote setup for professional use. Adding a 2nd remote for someone else to control the gimbal is super easy!! This unit comes with the following items: -Inspire 1 v1.0 quadcopter/drone -1 remote control for inspire, with HDMI out -1 intelligent flight battery -4 sets of quick release propellers (8 items) -battery charger -remote control lanyard -extra quick release motor parts -micro USB to USB cables for updates and connecting tablet (non Apple) -DJI Inspire travel / storage case -16GB micro SD card This has everything you need to fly it the day you receive it!! Battery will need to have low levels for shipping, so when you receive it you will have to charge it.

New DJI Inspire 1 RAW Quadcopter with Zenmuse X5R 4K Camera and 3-Axis Gimbal

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 New DJI Inspire 1 RAW Quadcopter with Zenmuse X5R 4K Camera and 3-Axis Gimbal (original ) DJI Inspire 1 dron, Zenmuse x5r camera, 2 remote controller, SSD card 512gb, all standart cabels, 8 Props, 1 battery, free case Manual Specs Performance Hovering Accuracy (GPS Mode) Vertical: 1.6′ / 0.5 m Horizontal: 8.2′ / 2.5 m Maximum Angular Velocity Pitch: 300°/s Yaw: 150°/s Maximum Tilt Angle 35°/s Maximum Ascent/Descent Speed Ascent: 16.4 fps / 5 m/s Descent: 13.1 fps / 4 m/s Maximum Speed 72.2 fps / 22 m/s (Attitude mode; no wind) Maximum Flight Altitude 14,764′ / 4,500 m Maximum Wind Speed Resistance 32.8 fps / 10 m/s Maximum Flight Time Up to 18 minutes Camera Model Name: Zenmuse X5R Lens Mount MFT (Micro Four Thirds) Photo Resolution 16 MP (4608 x 3456) Video Resolution DCI 4K (4096 x 2160): 24p, 25p UHD 4K (3840 x 2160): 25p, 30p FHD (1920 x 1080): 24p, 25p, 30p, 48p, 50p, 60p Field of view (FOV) 15 mm f1.7 :72° (included) 12 mm f2.0:84° (available separately) Photo Modes Single shot Burst: 3, 5, or 7 frames Auto Exposure (AE) Bracketing: 3/5 bracketed frames at 0.7 EV bias Time-Lapse: 3, 5, 7, 10, 20, 30, or 60 second intervals ISO Range 100 to 25600 Shutter Speed 8 to 1/8000 second Video Bitrate Up to 2.4 Gbps (1.7 Gbps average) Supported File Types Photo: JPEG, DNG RAW Video: MP4, MOV (MPEG-4/AVC/H.264F) RAW Video: CinemaDNG RAW File System: FAT32 / exFAT Recording Media Class 10 / UHS-1 or better microSD (up to 64 GB) 512 GB SSD (for RAW video recording) Power Consumption Static: 19.5 W Peak: 25 W Operating Temperature 32 to 104°F / 0 to 40°C Dimensions (H x W x D) 5.4 x 4.9 x 5.2″ / 136 x 125 x 131 mm Weight With Standard Lens, Balancing Ring, Lens Hood, and microSD card: 1.3 lb / 583 g Lens Model DJI MFT 15 mm f/1.7 ASPH Mount MFT (Micro Four Thirds) Focal Length 15 mm 35 mm Equivalent: 30 mm Aperture Range f/1.7 to f/16 Focus Range 0.7′ (0.2 m) to ∞ Field of View 72° Elements 9 elements in 7 groups (3 aspherical elements) Aperture 7 diaphragm blades / circular aperture diaphragm Dimensions Maximum Diameter: 2.3″ / 57.5 mm Length: 1.4″ / 36 mm Weight 4.1 oz / 115 g Gimbal Model Zenmuse X5R Mount Detachable Number of Axes 3-axis Control Angle Accuracy ±0.02° Control Range Pitch: -90° to +30° Pan: ±320° Manual Control Speed Pitch: Up to 120°/second Pan: Up to 180°/second Flight Controller Indoor Hovering Enabled by default Vision Positioning Frequency: 50 Hz Velocity Range: Below 26.2 fps / 8 m/s (6.6′ / 2 m above the ground) Altitude Range: 2 to 196.8″ / 5 to 500 cm Operating Environment: Rich pattern surface with adequate lighting (> 15 lux) Operating Range: 0 to 8.2′ / 0 to 2.5 m Motor Model DJI 3510 Propeller Model DJI 1345 Transmitter Operating Frequency Transmitter to Transmitter: 5.728 to 5.850 GHz Transmitter to Aircraft: 2.400 to 2.483 GHz Range Line-of-Sight: Up to 6561.7′ / 2000 m Receive Sensitivity 1% PER:-93 dBm EIRP 10 dBm at 900 MHz; 8 dBm at 5.8 GHz; 20 dBm at 2.4 GHz Connectivity 1 x USB type A female (for connecting mobile device) 1 x Micro-USB for firmware updates 1 x Mini-HDMI video output for FPV 1 x CAN-Bus port (for future accessory) Dual User Capability Host-and-slave connection Mobile Device Holder Tablet or smartphone Output Power 9 W Power Requirements 1.2 A at 7.4 VDC Battery 6S LiPo; 6000 mAh Charging Temperature Less than 3 Months: -4 to 113°F / -20 to 45°C More than Three Months: 72 to 82°F / 22 to 28°C Storage Temperature 72 to 82°F / 22 to 28°C -4°F / -20°C Mobile Device Holder Device Width: 2 to 6.7″ / 5 to 17 cm Flight Battery Model TB47 Voltage 6S LiPo; 22.2 VDC Capacity 4500 mAh / 99.9 Wh Maximum Charging Power 180 W Operating Temperature -4 to 104°F / -20 to 40°C Storage Temperature -4 to 113°F / -20 to 45°C 72 to 82°F / 22 to 28°C Charging Temperature 32 to 104°F / 0 to 40°C Weight 1.3 lb / 570 g Charger Model A14-100P1A Voltage 26.3 VDC Output Power 100 W Mobile App System Requirements iOS: 7.1 or later Android: 4.1.2 or later Note: The device must be connected to a transmitter via USB (wireless linking is not supporting). Additionally, waypoint navigation requires an active Internet connection in order to load the maps General Model Aircraft: T600 Operating Temperature 14 to 104°F / -10 to 40°C Dimensions Diagonal Distance: Landing Gear Lowered: 22″ / 559 mm Landing Gear Raised: 22.9″ / 581 mm Overall Dimensions: 17.2 x 17.8 x 11.9″ / 438 x 451 x 301 mm Weight Not specified by manufacturer Packaging Info Package Weight 26.5 lb Box Dimensions (LxWxH) 22.5 x 21.0 x 12.0″

DJI Inspire 1 Professional Drone Zenmuse X5 – 4K HD Camera & 3 Axis Gimbal

This is a very carefully opened box version two inspire x5 including lens gimbal camera the inspire aircraft all components sealed. This is one of three inspires from a production co. We opened for unboxing video. only thing noticeable is the re application of clear plastic on the remote controller however still in plastic as pictured. We would love to sell pp direct or though other site with buying protection will offer incentive plus expo shipping this cuts down on high selling fees Highlights 4K MFT Camera with 3-Axis Gimbal 15mm f/1.7 Lens Included Up to 1.2 Mile Radio Range GPS-Based Stabilization System Optical Flow Sensor for Indoor Flying DJI Lightbridge System Integrated Live 720p HD Monitoring with Lightbridge Retractable Carbon Fiber Arms Unobstructed 360° Shooting Dual Transmitter Operation Supported A Micro Four Thirds CMOS sensor with 4K image capture is introduced to DJI’s quadcopter line with the Inspire 1 PRO featuring the Zenmuse X5 camera and gimbal system along with a 15mm f/1.7 lens. Forgoing the fixed landing gear design found on many earlier quadcopters, the Inspire 1 features a retractable arm system whereby the underside of each prop motor has a foot to act as a landing pod when the arms are lowered. In-flight, the arms lift up to provide the camera an unobstructed 360-degree view. A 3-axis gimbal keeps shots steady and the camera pointed the same direction as the quadcopter banks and turns. The camera records internally to microSDHC/SDXC memory cards and can also beam a live 720p feed to a mobile device running the DJI GO app or a monitor or FPV glasses with an HDMI input. One transmitter (radio controller) is included and a second can be added so that one operator can pilot and another can pan and tilt the camera. As with many other multi-rotor systems, the Inspire 1 relies on a GPS-based stabilization system that – thanks to spatial awareness – is able to hold a position even when experiencing wind interference, can compensate for overzealous pilot inputs to help avoid stalling, automatically brings the aircraft home in the event of signal loss or at the press of a button, and makes possible a number of semi-automated flight modes that can be enabled through the app. There is also an “indoor” mode which relies on Vision Position technology – combining optical flow with ultrasonics – to provide stability indoors or in other contexts where GPS is unavailable (Note: certain features will be unavailable in indoor mode). What Ready-to-Fly Means This Inspire 1 bundle comes ready-to-fly (RTF). This means a pre-bound transmitter (radio controller) is included and that no major assembly is required – in particular, no assembly that requires soldering. It is important – as with any multi-rotor – to follow the user guide to ensure proper calibration before embarking on your first flightIntegrated 4K Camera with MFT Mount and 15mm Lens Micro Four Thirds Sensor with MFT Mount Sporting a Micro Four Thirds CMOS sensor, the Inspire 1 PRO introduces mirrorless camera performance to the Inspire series. The featuring a standard MFT mount, the Zenmuse X5 camera includes the Panasonic Lumix 15mm f/1.7 lens, and also works with the separately available Olympus M. ED 12mm f/2.0 lens4K and HD Video Capture The Zenmuse X5 is able to capture video at up to DCI 4K 4096 x 2160 at 23.98p or UHD 4K at 29.97p16MP Stills Capability Not just for video, the Zenmuse X5 can snap still from the air at up to 16MP resolution. In addition to single-shot, the camera support busts of 3, 5, or 7 frames and can take time-lapse at stepped intervals of between three and 60 seconds3-Axis Gimbal The Zenmuse X5 camera is mounted via an integrated 3-axis gimbal which uses brushless servo motors to keep the shot stable and the horizon level. The camera pans a full 360-degrees so that no matter which way the quadcopter turns, the camera can remain locked on the subject. Manual panning and tilting can be affected using controls on the transmitterLive HD View A real-time feed from the Zenmuse X5 camera can be displayed in 720p HD on a mobile device or HDMI monitor, making this it a great choice for FPV (first-person view) flying as well as enabling videographers and photographers to monitor framing from the ground. This is made possible by the inclusion of the DJI Lightbridge system within the flight electronics, which features a range of up to 1.2 milesFor connecting an FPV monitor or glasses there is an HDMI port on the transmitter. Plus there is a USB port to keep you mobile device’s battery topped up. And included mount allows you to attach a smartphone or tablet directly to the transmitterModular Gimbal and Camera The Zenmuse X5 gimbal and camera assembly can be removed from the Inspire 1 for safe transport and future upgradesAirframe Design Retractable Carbon Fiber Arms The prop arms rest in a lowered position when the Inspire is on the ground, acting as landing gear. Once in the air, they can be retracted to give the camera unobstructed views across 360-degrees. Carbon fiber is used in the construction because of its high strength to weight ratioAerodynamic Design Not only does it give the Inspire 1 a sleek look, the aerodynamic airframe helps reduce resistance for better performance and increased battery lifeFlight Control System Fly Indoors and Without GPS DJI’s Optical Flow technology uses a specially designed camera as well as sonic waves to provide the same stability function indoors as GPS does outdoors. This technology allows the Inspire to hold its location, stop when the controls are released, and quickly respond to pilot commands even when GPS is unavailableApp-Based Control Software Everything from manual camera controls to flight telemetry – even auto takeoff and landing – can be accessed via the Inspire 1 Mobile app. It is also possible to create autopilot courses using waypoints, just as you would on the DJI iPad Ground Station SystemNote: The tablet must be connected to the transmitter via USB, and to use the waypoint map an Internet connection is requiredManual Mode Change all of your camera settings, including ISO, White Balance, Exposure, and more on the fly ensuring every shot looks exactly the way you wantLive Map and Radar See precisely where your Inspire 1 is at all times on the live map. The map can be enlarged when needed, and shows your most recent flight pathDynamic Home Point When GPS signal is available on the transmitter (remote control), the Home Point automatically refreshes. This becomes useful while traveling in a car or on a boat allowing the return-to-home point to move where the operator goes. Multiple configurations are available via the Dynamic Home Point functionAuto-Takeoff and Landing Takeoff and landing are available with just a tap. Tap once to takeoff and your Inspire 1 will hover and transform, ready to start filming. Then tap again to make it transform into landing mode and auto landTransmitter Customization Put yourself in charge by tailoring the Inspire 1’s controls to your personal needs. This way, your Inspire 1 moves and responds in ways you’re most comfortable withTransmitter (Radio Controller) Take control of your Inspire 1 in the air with a dedicated transmitter (radio controller) designed specifically for it. Operating on 2.4 GHz, it features dedicated buttons for photo and video capture, a gimbal control dial, and more. It includes an integrated 6000mAh rechargeable batteryUse Two Transmitters For an even greater level of precision, use a second transmitter and fly with a friend. With two people controlling the same quadcopter, one person pilots the flight path while the other aims the gimbal and camera. Each user can have their own screen to see exactly what is being shot in real-timeSmart Battery System Smart Power Management The flight battery constantly supplies the flight computer with remaining voltage. Using special algorithms the computer supplies the pilot with estimates of remaining flying distance and time to return homeAutomated Charging The battery tracks the voltage of each cell, the total number of charges and discharges, and the overall health and battery status

DJI INSPIRE 1 Quadcopter Drone Zenmuse X3 4K HD Plus EXTRAS Original CASE

Selling a perfectly flying and excellent condition DJI Inspire 1. Never crashed, always flown with care and stored in case when finished flying. This was professionally flown on video shoots and sets with no issues at all. Selling because we have moved on to a bigger flying platform. Stickers on arms will be removed before shipping. Comes with the following: – Complete Inspire 1 /w custom front FPV camera and 5.8ghz video transmitter installed. (Antenna Included) – Dual radios – 5 Batteries (4 TB48, 1 TB47) – Propellers & hardware. Brand new and the current used ones which are excellent – DJI X3 Camera , with original lens/filters – SRP Professional ND 16 & ND 8 Filters. – Two batteries chargers – Two USB cables to hook up tablet or smart phone