DJI Inspire 1 Newest Rev D + Dual Remotes + 4 Batteries + Extras and All Updates

*re-list person never paid for the last listing* *buy it now is by far the best deal on ebay! This is for a gently used revision D of the Inspire 1 (the newest revision as of 11/15/2015) Completely Updated (controllers/all batteries/gimbal/quad) and under 5 hours on it total This listing includes:Inspire 1 Dual Remote w/case – $3399Inspire 1 Charging Hub – $90Inspire 1 180W Charger – $95Inspire 1 100W Charger – $614x TB48 Batteries 200ea – $800X3 Filters – $40 DJI cables Apple/Android – $20Backup Props – $20Monitor Hood – $60Total – ——$4580—— ALL BATTERIES ARE LIKE NEWBattery 1 – 7 ChargesBattery 2 – 7 ChargesBattery 3 – 7 ChargesBattery 4 – 9 Charges Batteries and Controllers all labeled for use

DJI Inspire 1 Quadracopter – Two Remotes – 4K Camera – Case – Five Batteries

DJI Inspire – Ready to fly Drone in perfect condition – Flown but never crashed – Fully updated to latest software Dual Remotes (one can control camera while the other controls the drone)2 DJI TB47 4500mAh Batteries3 DJI TB48 5700mAh Batteries Gimbal and 4K camera2 sets of propellers (I’ve used one set and the other is still in the package)DJI Carrying Case – The case has some wear on the outside but works perfectly – It protects the drone nicely. Battery ChargerSafety clips for propellers This is my personal drone and I’ve taken great care of it. If you have any questions please don’t hesitate to ask. Thank You On Nov-30-15 at 14:01:35 PST, seller added the following information: It was purchased February 13, 2015 and it still under factory warranty until February 13, 2016. I will include a copy of the original receipt.

DJI OSMO (NA) Handheld Fully Stabilized 4K 12MP Camera

The osmo system from DJI combines the Zen muse x3 camera/gimbal with a detachable handle, bringing the benefits of stabilized 4K shooting to a handheld form factor. The camera features a 1/2.3″ CMOS sensor that enables up to full DCI 4K (4096 X 2160) video recording at 24 or 25P as well as 12mp photo capability. Basic controls for the camera and gimbal are provided on the handle itself, including a joystick for manual pan and tilt. For monitoring and more advanced operation, there is a WI-FI link allowing osmo to be tethered to a mobile device running the DJI go IOS app. An included mobile device holder effectively turns your smartphone into an on-board monitor. The WI-FI features a range of up to 85’, so you can operate the camera and gimbal remotely as well. Ergonomic handle providing a grip for easy handheld operation, the handle incorporates a joystick for panning and tilting the gimbal. There is also record start/stop button and a shutter button, putting the essential controls right at your fingertips. A trigger allows you to toggle modes. The camera/gimbal assembly can detach from the handle for storage or use in other applications DJI go app remotely operate the gimbal and view a live feed using the go app for IOS. A WI-FI link in the camera allows you to tether your mobile device, and supports a range of up to 85′. In addition to basic operation, the APP allows you to change camera settings and access advanced features detachable mobile device holder. A rosette attachment allows you to connect the included mobile device holder. This enables you to use your smartphone as a monitor to view a live image – streamed via Wi-Fi – from the camera. It can be rotated to achieve an optimal viewing angle. The mobile device holder disconnects so that you can use osmo with other mounting accessories, such as the extension rod 3-axis gimbal stabilizer.

Product Features

  • 4K (4096 x 2160) video at 24 or 25P
  • 12MP JPEG or DNG raw sill photos
  • Handle with camera and gimbal controls
  • WI-FI for monitoring / remote operation
  • The phone in the main picture is not included

Click Here For More Information

Prop Balance Rod – DJI INSPIRE 1 & 3DR IRIS+

If you already own the original SpeedyTM Prop Balancer PR-Inspire 1 for DJI Inspire 1 props then this gives you the ADDED flexibility for balancing typical no hub props. The Speedy® Prop Rod – PR-Inspire1 is a 5.5″ long Prop Rod made from an accurately machined rod of aircraft grade aluminum that is precision turned on a CNC lathe to a tolerance of .0005″ (1/2 thousandths!). On the CNC lathe the rod is held in place with a friction collet to protect the extra smooth surface of the rod so it will roll freely for precision balancing.

Product Features

  • Works with DJI Inspire 1 or 3DR+
  • Aircraft Grade Aluminum
  • Machined on CNC lathe to within tolerance of .0005″
  • 5.5″ long rod

Click Here For More Information

DJI Inspire 1 with 2 Remotes and extra batteries

Great condition – never been crashed – always babied. Works perfectly.Great price and NO RESERVE!! Includes: Inspire 1 Gimble and Camera 2x Remote Control (one has some velcro applied to it – see photo) DJI Strap for remote 8x Props 2x TB48 Batteries 1x TB47 Battery 1x Charger and cords 1x Original Clear Filter 1x Original ND Filter Tool and dampeners Original manual Original 633x 16GB Micro SD Original Case I require insurance for shipping – so that will be added to the price when I send you the invoice. It will be only the price charged by UPS or FEDEX for the winning value of the drone.

DJI Inspire 1 Aluminum Handle Replacement Brackets (for the OEM Case)

In response to the multitude of Inspire 1 owners who have suffered an Inspire 1 case handle failure, DSLRPros is proud to present the Inspire 1 Case Handle Bracket Upgrade. Protect your investment by preventing any potential damage from a dropped case due to handle failure. The DSLRPros Inspire 1 Case Handle Bracket Upgrade is made from the highest quality aircraft grade aluminum, and provides a lightweight, strong and easy to install solution. A standard Phillips head screwdriver is all that’s needed to upgrade your case, and give you the confidence to carry your craft anywhere you want to go.

Product Features

  • Stylish brushed aluminum finish
  • Easy to install
  • High strength aluminum construction

Click Here For More Information

DJI Inspire 1 Quadcopter Drone 4K HD Camera Remote and Case – DAMAGED GIMBAL

Awesome DJI Inspire 1 Drone! The Drone hit a tree and the Camera gimbal arm snapped.It can be replaced for $550 from DJI. No other damage – I have mounted my other gimbal from my second Inspire and it flies and navigates perfectly! This is like getting a new Inspire, but without the camera (it flies without the camera too- I have tried it). I am including the damaged gimbal/camera – maybe it can be fixed. Three TB47 batteries included, but one of them doesn’t seem to work well. The other two are like new. Original case, controller, two full sets of propellers included, plus two extra. Everything else that came with it is included too. NO iPad! Please ask any questions BEFORE bidding. Shipping is based on where you live. I will package it very well, using the original shipping box.Pickup in CA 91307 is of course free!!! I reserve the right to cancel bids of those with a poor feedback rating, so please contact me first if you have little or no feedback. Payment is due within 24 hours via Paypal only, or cash if you pickup in person. Don’t miss this opportunity to get a great Inspire 1 at a great price. Good Luck and Happy Bidding!

Genuine DJI Phantom 3 Prop Guard Part #2 Propeller Guards For Professional Advanced

One set of DJI Phantom propeller guards. Includes 4 prop guards customized for the Phantom 3 series. Designed to protect your propellers during collisions, they help you fly with confidence, whether you are a beginner or an expert quadcopter pilot. This set is compatible with Phantom 3 Professional and Phantom 3 Advanced.

Product Features

  • DJI Part 2 Propeller Guard – Safety Cord – DJI Warranty
  • Protects your Phantom from prop damage
  • Lightweight and durable
  • Sized for use with 9″ propellers
  • Includes safety cord to prevent objects from entering spaces between guards

Click Here For More Information

DJI Phantom 3 Inspire 1 FPV Phone Holder Clip to Monitor Holder for 10 inch IPAD Tablet

Item Name: Phone Holder
Color : White
Support 10 inches Tablet
The max extend width is 20cm

Package Included:
1 x Phone Holder

Product Features

  • Item Name: Phone Holder
  • The max extend width is 20cm
  • Support 10 inches Table
  • Package Included: 1 x Phone Holder
  • Usage:DJI Phantom 3 Inspire 1

Click Here For More Information

Hobby-Ace DJI Inspire 1 Propeller Guard Quick Release Propeller Protector (Black)


DJI Inspire 1 Prop Guard Tool-Free Quick Snap On/Off Prop Guards
It fit on the Original dji inspire 1 propellers
Tool-free installation,very easy to install
Super light weight ,Only about 32 grams for a kit
With these prop guard, you will never break your props and crash your inspire 1 by accidently bump into trees, walls, or any other obstacles.
Package include: 1 kit dji inspire1 prop guard
Package Including
4PCS * DJI Inspire 1 Propeller Guard

Product Features

  • DJI Inspire 1 Prop Guard Tool-Free Quick Snap OnOff Prop Guards
  • It fit on the Original dji inspire 1 propellers. Tool-free installation,very easy to install.
  • Super light weight ,Only about 32 grams for a kit
  • Propeller Guard only,drone is not incloded
  • More Propeller products are provided by Hobby-Ace on Amazon.Bring your eyes into the sky and racing like a free bird, enjoy the ultimate first person view experience.

Click Here For More Information

Used DJI Inspire 1 Quadcopter 4K Camera Upgraded Circular Antenna Installed

Great condition. Includes original Inspire case, Inspire 1 Quadcopter, X3 Camera, 2 sets of Props, Charger, 1 Battery and DJI Controller strap. Never been in a crash. Firmware at latest level. Controller has been upgraded with FPVLR’s Long Range Circular Antennas (2-3x stock distance) No reserve.

DJI Inspire 1 – 8 flights, No Reserve

DJI Inspire 1 Single Op.8 flights old – no crashes We just received an I1 PRO and do not need 2 Inspires. Included:- Inspire 1-X3 4K camera and case- Remote- (1) TB-47 Battery (8 charge cycles)- (1) Batt charger (not pictured, I forgot it was plugged into the wall)-(1) Clear UV filter (1) ND4 filter- (1) Pair of extra props- Cold weather batt insulating stickers- DJI case- All Manuals that came with it. -$50 Priority Shipping (except HI, actual shipping cost to HI)- No international shipping. INSPIRE 1 WITH SINGLE REMOTE: Perfect condition, limited flights, includes case and all original package contents.Ready-to-fly aerial systemIncluded professional 4K camera and 3-axis stabilization gimbalLive, wireless HD video transmission via DJI LightbridgeDedicated remote with flight and camera controlsPowerful app to adjust camera settings, edit videos, and moreVision Positioning system for GPS-free or indoor flightPerfect for high-level shoots and professional sets